Putting plastic windows is only half the battle. In order for them to retain their original appearance and serve you for many years, they need proper care. Many people have a question about how to wash plastic windows at home.

Detergents

If we talk about products for the care of plastic windows, then every year there are more and more of them. The industry produces ever newer and better products.

For cleaning you may need:

• "Mr Muscle" - the product is intended for washing glasses, it will allow you to get a transparent window without streaks;
• "Formula 409" is suitable for cleaning stains;
• "Sanita" will help to gently clean the pollution;
• "Frosch" will get rid of traces of installation work;
• "White Cat" - a rag that is designed for washing glass and plastic surfaces;
• "Domestos" - a gel that helps restore the whiteness of the plastic frame;
• "Mr. Proper" - will perfectly cope with traces of fingers, fat, soot;
• "Pemolux" is recommended for cleaning old dirt and stains;
• gel "Komet" is used for washing kitchen windows - it cleans greasy dirt well;
• laundry detergent, laundry soap or dish detergent can be used on fresh stains and a small area.

Household chemicals clean glass from dirt and dust well

In addition to the use of household chemicals, you can resort to folk remedies that are no less effective. Consider how you can wash plastic windows at home:

• Soap solution. Take any powder, laundry soap and dissolve in water. The resulting composition is used to wash windows.
• Dentifrice. It is mixed with chalk to a homogeneous consistency of sour cream, applied to the dirt and allowed to dry, after which it is washed with a dry cloth.
• A solution of vinegar or citric acid in combination with soda gives an excellent effect. Soda is applied to the surface, and intensively rubbed with a sponge with acid.

Washing technique

In order for plastic to remain aesthetically attractive for a long time, you need to know how to wash plastic windows at home and follow some rules for caring for them. The main point is the right choice of inventory. Do not use abrasive products that could scratch the plastic surface or scratch the glass. It is worth using soft rags, sponges, paper towels and napkins.

To clean the double-glazed window, use soft rags and sponges.

Also, remember some rules:

• wash windows on a cloudy day so that the glass does not dry so quickly, and you have time to wipe the surface before iridescent stains appear on it;
• first of all, the frame is cleaned, then only the double-glazed window;
• apply the detergent composition evenly and in one direction, circular movements create stains;
• for glasses it is better to take special alcohol solutions of detergents.

For good quality cleaning, it is worth following the correct sequence of actions. If the window was recently installed, you need to peel off all the film that protected the frame during transportation.

It is necessary to peel off all the film that was used during the transportation of the double-glazed window

Wash the plastic with ordinary soapy water from dust and dirt. If there are separate areas of severe contamination, they are treated with special means. Minor scratches can be repaired with polish. However, not all products can be used for cleaning plastic windows.

Important! Remember not to use:

• abrasive powder products will leave scratches on the surface, creating an untidy appearance of the plastic structure;
• acid and solvent can change the color of the panel, so use them with caution.

Proper care of the plastic frame and double-glazed window

The durability of use is due to proper care. This is especially true in the winter season, so you need to know how to care for plastic windows in winter.

A hex wrench is used to adjust plastic windows.

In order to prepare the window for the winter, you will need tools and equipment. These include:

• rags and napkins;
• soft brush;
• hexagon;
• sealant lubricant;
• machine oil.

Sequence of work

First of all, it is necessary to wash the windows from dirt and dust accumulated during the spring-summer period. Soft rags and napkins are used, as well as non-abrasive detergents. Stubborn soiling must not be removed using a knife and cleaning powders.. Before you start washing windows, you should brush off the dust with a brush.

Dirt accumulated over the summer can make it difficult to open and close the window

After that, you need to start adjusting the fittings. You can do this with a hexagon. In order to avoid the penetration of cold into the room in winter, it is necessary to switch the clamps on the sashes to winter mode. Thus, the fit of the window frame will be stronger.

Switching the window to winter mode ensures a tighter fit of the frame

It is important to lubricate the fittings with oil. After applying it to the parts, you need to open and close the sash several times, this will help the oil to distribute. This procedure should be repeated throughout the winter, the main thing is not to do it in severe frosts.

It is necessary to lubricate window mechanisms several times a season.

The seal also requires attention. Rubber products wear out over time and cease to fit snugly, this affects the tightness of the window. You can wash the gum right on the window or by removing it. The procedure must be carried out with the use of a detergent, after which it must be wiped dry. The process is completed by applying a silicone agent for rubber seals.

Silicone grease prevents rapid wear of the rubber seal

If you see that the window fogs up in winter or condensation collects, then you need to contact the experts. They will check the condition of the rubber seal and replace it if it is worn out. It is important to replace parts on time, this will help extend the life of the window.

Insulating glass maintenance

Provided that a plastic window is properly installed, a double-glazed window will last approximately 40 years. When installing, make sure that the windows are in a special protective film that will protect them from scratches during transportation and installation. Such windows do not need painting or pasting for the winter, but they still need to be washed at least twice a year. Do not do this at low temperatures, as the glass may burst from contact with water.

Glass can be washed with soapy water. Do not use abrasive powders and brushes that scratch the glass surface.

Window sill care

The window sill deserves special attention. This is especially true for those who like to decorate their apartment with indoor plants. Water from watering flowers, falling on the windowsill, eventually forms yellow circles. These stains are very difficult to remove, and sometimes simply impossible, so you should use a special self-adhesive film on the windowsill, which can be white or another color, as well as trays for indoor plants.

The window sill is protected from moisture with a special film

The texture of the window sill may vary from manufacturer to manufacturer. They are smooth, porous or rough. When selling, the consultant usually talks about what kind of material is used for the window sill and how to wash off the dirt. However, some features should be taken into account, for example, a rough window sill can be cleaned using a hard brush, but in no case should a scraper or knife be used.

Slope care

Slopes also need maintenance, but the means for this directly depend on the materials from which they are made. If they are made of plastic, they will not require special care. They are easy to wash and clean from dust and dirt. A special feature is the need to replace the sealant, which, a few years after installation, is completely removed and replaced with a new one..

After several years of operation, the sealant must be replaced.

If the slope is made of drywall, then it is covered with paint that can be washed and updated if necessary. When using cork or bamboo, it is enough to systematically wipe them with a damp cloth from dust.

Plastered slopes should not be washed, because they are unstable to moisture, they can be wiped with a damp or dry cloth. Acrylic sealant should be used at the joints, and the surface should be painted in a timely manner.

How to wash plastic windows is a topical issue today. A special part of any building are openings. They not only play the role of a source of natural light in the room, but also open a view to the outside.

At the same time, they are considered the most vulnerable place in the house, because it is their damage that can become an easy way for intruders to enter the house, and also in cold weather it is through them that cold and frost enter the house.

Content:

Device

The use of advanced technologies in the production of windows made it possible to minimize the shortcomings. The most popular for them is PVC. They can differ in size, types of double-glazed windows, functionality, but at the same time they have the following qualities:

• high level of thermal insulation properties;
• unique sound insulation properties;
• strength;
• resistance to damage, which ensures durability and reliability;
• resistance to climatic features to temperature extremes, increased humidity, exposure to sunlight, etc .;
• aesthetics, which allows you to fit products into any interior.

In addition to the above criteria, manufacturers also note that their products are fire resistant, environmentally friendly and hygienic.

Today's window opening consists of many little things, each of which needs a special approach. Let's consider them in detail:

• PVC profile is the basis, it is considered an analogue of a conventional window frame. Acts as the bearing part of double-glazed windows.
• A double-glazed window is a construction of several layers of modern advanced thick glass, which includes additional impurities.
• The seal is a rubber band designed to fix the double-glazed window in the frame. Accessories are additional segments that make the device more functional and aesthetic. These include awnings, handles, etc.

Note that the opening segments must be equipped with a mosquito net, which minimizes the possibility of insects entering the building during the warm season.

The functionality and ease of use depend on the quality of the add-ons.

Let's take a closer look at how to care for each of the above devices.

Cleaning of double-glazed windows

Full window cleaning is usually done every three months. It is especially important to do this during the off-season. Cleanliness is not just an aesthetic effect.

It will ensure that natural sunlight enters the room in the right amount. In addition to saving electricity, this will also provide a certain amount of solar heat.

Most housewives believe that washing can be called the most difficult cleaning procedure. But due to the peculiarity of this design, modern double-glazed windows are not difficult.

A big mistake can be called the use of chemical detergents, since most of them contain solvents and abrasives.

The consequence of their impact is clouding of the glass. In order to get rid of foreign contamination, you need to use the usual detergent, which is suitable for washing dishes.

To date, manufacturers offer many of them. They are simply applied to a pre-moistened cloth and spread with light movements over the glass area.

After that, the soap is washed off with clean water, then wiped dry with a cloth.

Before washing plastic windows at home, we recommend using microfiber cloths. This is a modern product designed specifically for cleaning glass surfaces. You can use a piece of terry cloth, which also eliminates stains.

Many people ask the question "how to wash the types of windows that are tinted?". Their care is the same as usual.

Since it is necessary to wash not only from the inside, but also from the outside, many people have the question “what is the right way to do this if they are located on the upper floors of an apartment building?”.

In this case, one of two common methods is used.

In the first case, you need to purchase a special T-shaped scraper. Its peculiarity is that it has a long handle. This allows you to safely clean the structure from the outside.

But the disadvantage of the technology is that when using it, you have to bend outward.

A safer, but also more expensive tool is a magnetic brush. It allows you to clean the surface simultaneously from two sides.

The accessory consists of two halves with a built-in magnet. Putting rags on them, we place one inside and the second outside and carry out all the necessary actions.

Profile processing

The frame, which is a special PVC profile, must be washed without fail. It is resistant to a variety of chemicals.

Therefore, the choice of detergent depends on the degree of contamination. With a small level of dust, you can use a regular soap solution.

If there are stubborn stains on the area, which is typical for the kitchen, more active substances should be used.

Despite the fact that plastic is resistant to mechanical damage, it is not necessary to use hard materials for its processing, which can be washcloths and scrapers. This can cause scratches, which will reduce the aesthetics of your profile.

Sealant processing

When carrying out general cleaning, which includes working with window openings, most housewives make the mistake of processing only two segments.

Emphasize that all parts can be processed, even invisible ones.

One of these is a rubber band. It is a rubber gasket located between the double-glazed window and the main frame.

This small and inconspicuous element plays a very important role in the design, since it is he who provides heat and sound insulation.

To make it last longer, you also need to clean it. Like most other parts, it can be treated with soap.

Make sure that debris does not get into the joints and is not under the seal.

If the procedure for caring for the seal is not carried out, the dirt accumulating on it contributes to the drying of the material, the appearance of cracks and failure.

In this regard, the device loses its functionality. In addition to washing, a simple procedure will extend the life of such an element.

To prevent drying out in the warm season, the tourniquet should be treated with glycerin. If there is a risk of freezing, then Vaseline should be used.

Also for this purpose, you can use silicone oil, which is lubricated 2-3 times a year. Such attention will allow this part to last more than five years.

As for accessories

Many housewives, carefully processing their window opening, are wondering "what to do with fittings?". She does not need washing, but she should provide annual lubrication.

Perhaps the most common mistake is to apply a lubricant on top of the remnants of an already used one.

It should only be applied to a clean surface. Therefore, before lubricating the mechanism, it is worth removing the old grease, as well as the dirt that could accumulate on it during the service.

To do this, you need to use a soft material, which at the same time will not leave excess pile on the surface.

Degreasing the element will allow you to get rid of traces of old grease. To do this, it is best to use rubbing alcohol or acetone-based nail polish remover.

New lubricant is applied to the already cleaned element and the mechanism is activated.

For cleaning fittings, an aerosol water-repellent agent that resists corrosion VD-40 is suitable.

Output

PVC structures are considered a priority today. They meet the requirements of the modern consumer, both technically and aesthetically.

Such pleasure has become available, but in comparison with other materials - not the cheapest.

It is possible to ensure long-term high-quality functioning only if the rules of operation and care are observed.

It is important that most housewives unknowingly make a mistake by treating them with specialized chemicals.

If you are wondering “how to wash a plastic window without streaks?” Ordinary soap and a soft piece of cloth or microfiber will come to your aid.

With a soapy solution, you can process both a double-glazed window and bases and bundles.

To process the glass from the outside, use special tools such as a T-shaped or magnetic brush.

They will ensure the safety of your work during general cleaning. The choice of model depends on your preference.

Window cleaning is one of the components of general house cleaning. You can wash them without streaks with available improvised means. It's nice to look through clean windows when dirt and dust do not spoil the view. On average, it is necessary to wash plastic windows every 3-4 months, with the first thaw in spring and the last rains in autumn.

Today, a variety of products are sold that will help wash windows without leaving streaks. But if they are not there, it is quite possible to get by with "grandmother's" methods, the result will be no worse.

Window cleaning rules

To successfully wash windows, you should:

1. Choose the best day. If you wash in sunny or windy weather, detergents will dry quickly, leaving stains. Windless, overcast weather required.
2. Prepare the necessary tools/ingredients in advance.
3. Clean the frames, wait for drying. Remove unnecessary items from the windowsill.
4. Wash first from the outside, then from the inside.
5. Wipe vertically, then horizontally. This will help you avoid divorce.
6. Use protective gloves: rubber and cotton.
7. Do not use abrasive powders.
8. At the end, polish and lubricate the fittings with machine oil.

Procedure

Adhering to a certain order, you can wash windows with high quality and correctly without streaks:

1. Wash the window frame. Remove the remaining water, foam. Wipe dry.
2. Pour into a container of clean water, rinse the glass with a napkin. Scraper to drive the dirt down, remove. This will remove the top layer of dirt.
3. Replace dirty water.
4. Wash the surface using the chosen method. First outside, then inside.
5. Wash off with clean water. Wipe with a scraper or newspaper.
6. Wash blinds and window sills.

Window cleaners

You can wash plastic windows with specialized tools and folk recipes.

Regardless of the chosen means, the washing procedure will be as follows:

1. Wet a cloth, soak and remove dirt.
2. Use the selected cleaning method, rinse.
3. Wipe dry.
4. Polish the surface.

Do not use rough material, use soft rags, napkins. This will avoid scratches.

Folk ways

Folk recipes are constantly competing with professional cleaners. The absence of chemicals does not harm human health. To wash plastic windows, improvised means are used:

• vinegar water;
• ammonia;
• newsprint;
• manganese;

Advice! If you add salt or vinegar to the washing water, the glass will shine.

vinegar water

You will need 9% vinegar. To avoid divorce, you must:

1. Dissolve 5 tbsp. l. vinegar in 2.5 liters of warm water. Mix thoroughly. Calculate the required amount of solution yourself.
2. Wash the surface of the window with the resulting liquid, erasing dirt.
3. Rinse with clean water.

Advice! Lemon juice can replace vinegar. Dilute 50 ml with 300 ml of water, wash the contaminated area.

Ammonia

Ammonia is an ammonia solution that can dissolve grease and dirt. It has a pronounced, unpleasant odor, so when cleaning, the room should be ventilated. You can buy it at a pharmacy, it costs about 40 rubles.

It is necessary to dilute 30 mg of ammonia in 2 liters of water and apply on glass. This recipe prevents the windows from icing in winter.

You can also prepare the following cleaning mix:

1. Combine 50 ml of ammonia, 50 ml of vinegar, 2 liters of water, 15 mg of starch.
2. Wash with the resulting solution.
3. Rinse windows with clean water.

a piece of chalk

Chalk is an excellent absorbent, so it removes greasy stains from windows. For this you need:

1. Make a soapy solution.
2. Wash windows with it.
3. Dilute 2 tbsp. l. chalk in a glass of water.
4. Wash with the mixture, wait 10 minutes.
5. Wipe with a soft, dry cloth when the glass is dry.

Advice! Powdered chalk can be replaced with tooth powder.

Soap solution + newsprint

Newspaper quickly absorbs moisture from any surface. Another feature is the shine that appears after cleaning. This is due to the fact that the printing ink contains lead. Sequencing:

1. Make a concentrated soap solution.
2. Prepare a container of clean water.
3. Wipe windows with soapy water, then rinse with clean water.
4. Dry with a dry cloth (microfiber).
5. Wipe the glass dry with newsprint.

Manganese

It is necessary to dilute several crystals of manganese. The water should be light pink in color. Wash, remove the remaining moisture with a newspaper.

Attention! Wait until the substance is completely dissolved, otherwise the glass can be scratched.

Tea

Strong tea will help wash glass without streaks:

1. Brew a cup of strong drink, cool.
2. Add 3 tbsp. l. vinegar.
3. Wash the windows with the resulting solution.
4. Wash off the remaining dirt, polish with newsprint.

Advice! For convenience, the liquid can be poured into a spray bottle and sprayed.

Professional

Glass cleaner will easily remove dirt, grease and stains.

To wash, you need to apply the product, wipe with a dry, soft cloth. If the pollution is abundant, the procedure is repeated.

High-quality solutions for glass cleaning:

1. "Mr. muscle. The composition contains ammonia.
2. Clin. It has a specific alcohol smell.
3. Help. Removes fat well.
4. "cif". Inexpensive but effective.
5. "Clean windows". Allows you to wash the glass at a low price.

Glass cleaning tools

The minimum list of inventory that will be needed for washing:

• gloves;
• napkin, rag, sponge;
• basins, buckets.

The speed and quality of the procedure will depend on the availability of additional devices. Common tools that will help you quickly clean windows:

• mop on a long handle;
• scraper (squeegee) for water;
• melamine sponge;
• magnetic brush;
• steam cleaner.

Window mop

The device allows you to adjust the length of the handle and change the angle of inclination. When the desired position is reached, it is fixed. The length can reach 2 m.

Rules for use: wash should be done with movements from one side to the other horizontally, gradually moving down. For heavy soiling, a washcloth and chemicals are used.

Scraper (squeegee) for water

A similar glass cleaning brush is a rubber screed designed to collect liquid. Sizes are from 20 to 60 cm.

How to use:

1. Perform primary processing: wash, soak the dirt.
2. Attach the device to the top of the glass, slowly lower it to the bottom. Thanks to the rubber component, the scraper fits snugly against the window, moisture and dirt are driven away and removed with a rag.
3. Re-attach the squeegee to the upper section of the glass, moving it to the side. Repeat procedure.
4. Continue until completely cleared. Wipe the wiper blade after each run.

Attention! Do not move the scraper in a random direction.

It is a plastic made by foaming melamine resin. Perfectly removes dirt, grease and other contaminants. In the process of use, the sponge is erased, decreases in size. No additional cleaning agents are required: the fibers absorb and remove dirt.

Instructions for use: moisten the sponge in water, wring it out a little, wipe the glass. When dirty, rinse with clean water.

Attention! Melamine sponge is not for the body, food.

The sponge consists of two brushes with magnets. One is for the inside of the window, the other is for the outside. To prevent the outer brush from falling, insurance is provided as a cord. With it, you can quickly and conveniently clean glass from both sides, for example, on a balcony.

Sponge use:

1. Wet glass with cleaning solution.
2. Moisten the cleaning surfaces of the brushes.
3. Attach the safety cord.
4. Attach one brush from the inside, the second (with insurance) - from the outside. Due to the magnet, the brushes will be attracted to each other.
5. Wash starting from the area around the frame. Then move to the central section, moving from top to bottom.

This multifunctional unit will help you quickly clean windows. This appliance contains a heating element that raises the temperature of the water and turns it into steam. When you press the “starter gun”, a jet of steam comes out, which cleans grease, dirt, stubborn stains, disinfects, and does not leave streaks. No detergents are required other than water. The algorithm of work is the following:

1. Clean the surface from dust with a dry cloth.
2. Pour water into the steam cleaner.
3. Put on the selected nozzle, turn on the device.
4. Using steam, treat the surface, remove excess moisture with a scraper.

The steam generator should not be too large and heavy, otherwise the hands will quickly get tired when cleaning. The most famous manufacturer of steam cleaners is Karcher.

How to clean a plastic window sill

If the plastic window sill has lost its whiteness, got dirty, measures must be taken to clean it from stains. You can wash yellowed plastic with:

1. Cleaning agents. The label must confirm compatibility with the plastic material. You can use alcohol-based glass cleaners.
2. Laundry detergent for white. To effectively wash the yellowness, it is necessary to dilute the powder with liquid to a mushy state. Cover the window sill with the mixture, rub with the rough side of the sponge. Old pollution must be left for a quarter of an hour. Wipe dry.
3. Soap. Make a very thick soapy solution, bring to a mushy appearance. Clean the yellowed plastic with the resulting mixture.
4. Tooth powder, chalk. Dilute 2-3 tbsp. l. with a little water. Apply a thick mixture on the windowsill, rub. Wait 15 minutes, remove residue with a damp cloth.

Advice! In the listed ways, you can wash the frames of plastic windows, PVC. Clean carefully, avoiding contact with glass.

Elena Tekin

A A

The next washing of plastic windows can significantly spoil the mood of the hostess. Washing plastic, and even white, is sometimes a thankless task, because with maximum effort you can not get a result at all. And vice versa - by following the simple recommendations of experienced housewives and window masters, you can get an excellent result at a minimum cost.

Your windows will shine clean!

Preparing to wash plastic windows - what do you need?

It is necessary to prepare for such an important procedure carefully by purchasing the missing cleaning products and tools in advance at the store. In most cases, special products are needed to clean plastic windows, and not universal ones for furniture or kitchens.

Useful list:

1. If your windows do not have heavy dirt or stains, and they just need to be refreshed, you can take regular laundry detergent or liquid detergent. You can also use a soda solution, 2 tablespoons per liter of warm water.
2. Gel «Domestos» will be needed if there are stubborn yellow spots on the frames and window sills, as well as in the presence of mold spots.
3. Creams for cleaning surfaces "Pemolux" or "Mr Muscle" useful if there are visible stains that are difficult to clean on the windowsill or frames of plastic windows - for example, traces of rust, black rubber stains, traces of flower pots, stains of grease or limescale.
4. Surface cleaner "Mr. property"- the best assistant in the fight against greasy coating on the windowsill, dark marks around the handles, dirty stains and soot stains.
5. Glass cleaner- any of your choice.

We have talked about the best cleaning products - but, if necessary, they can be replaced with your favorite and cheaper counterparts.

Read the labels carefully before use - the products must be suitable for washing plastic!

Folk remedies for washing plastic windows, namely double-glazed windows, frames and window sills

For those who like to use home remedies and recipes in cleaning, we recommend the following:

1. Baking soda: soda solution is suitable for both glass and plastic cleaning. If there is heavy dirt on the frames and the window sill, use a slurry of soda with water applied to a soft cloth.
2. Vinegar: added to clean water, it will wash the glass well - there will be no streaks when wiping them dry. Vinegar can also enhance the effect of baking soda for washing plastic on windows - extinguish the gruel of 2 tablespoons of soda with a tablespoon of 6% vinegar, and wash all existing stains with the resulting foam.
3. Starch: acts as a very soft and gentle abrasive that cleans glass with shine - and without streaks. A slurry of starch, slightly diluted with water, will cope with stains that have eaten into the plastic.
4. Laundry soap: we do not recommend using it for glasses if you do not want to wash the stains for a long time afterwards. But for gentle washing of plastic, soap is the best fit - especially if there is a greasy coating or handprints around the handles.
5. Chalk, tooth powder: These products will help clean stubborn marks on plastic frames. But keep in mind - if the plastic is glossy, scuffing may form on it with active friction!
6. Eraser, alcohol, tape, vegetable oil: Any of these products will help remove sticky tape, sticky tape or labels. With an eraser, you can simply erase the dried traces of glue. If the traces are still sticky, or there is a lot of dust on them, treat the stains with alcohol or vegetable oil, let it dissolve for 10-15 minutes, and then wipe with a napkin and rinse with a degreasing agent - for example, for washing dishes. With tape it's even easier: stick the tape over the old marks, wait a minute, then remove the tape with a sharp movement.

If even a little dust has collected on the window structure, then it is capable of retaining about 30% of the light, and with heavy pollution - up to 70%. Poor lighting affects the health and overall well-being of residents.

Why does dirt appear

Knowing for what reasons the structures become dirty, you can quickly solve the problem and correctly perform the entire cleaning process. Here are the main contributors to pollution.

• Precipitation. Snow, hail, rain quickly pollute the outside. In addition to stains, spots appear.
• Dust . It appears not only outside, but also indoors. We wipe it regularly, especially in the warm season. Do not leave dust on the windowsill, between the frames.
• temperature fluctuations. lead to the accumulation of condensate. Especially a lot of it can be in the kitchen, where food is constantly being prepared. Leaks form.
• smoking. A nicotine film appears on the glasses.

During the repair process, paints and varnishes can get on the glass and frames, which are quite difficult to remove. In order not to damage the surface, we protect them during work by covering them with foil, newspapers, cloth.

Preparing for the "general"

Before washing plastic windows at home, first of all we clean the window sill. We remove foreign objects from it. We take flower pots to the bathroom for "bathing". Curtains on which dust has accumulated are sent to the washing machine. If there are blinds, then you also need to worry about their cleanliness. Wipe them carefully. To prevent the accumulation of dust, spray with a special antistatic agent.

We pay special attention to mosquito nets. They quickly accumulate dirt, regardless of the time of year. Therefore, they need regular care. The easiest way is to process under the shower. Nets are installed only when completely dry.

Many owners hang foil on the windows, especially in those rooms where it is very hot and where direct sunlight constantly falls. Remove it before cleaning. Throw away or reuse. We hang up after complete drying of the surfaces.

Mold can appear on wooden frames, especially on the balcony, where it is damp. Before washing, remove it with a special store-bought solution or bleach. At the same time, we clean the frames and glass from insects, cobwebs, and dust.

What you need

The cleaning process will be faster and easier if you take care of the tools in advance. There is a basic set, without which wet cleaning cannot be carried out.

• Water tank. A plastic bucket or basin will do. It is not necessary to completely fill them with water, as it will spill.
• Sponge. It is good to wash windows without streaks if one of its sides has a hard base. Such a surface is effective in removing heavily soiled areas, especially dried stains.
• Detergents . We take both store and folk remedies.
• Clean rag. Non-woven, cotton fabric is best. As an alternative, we use natural suede or velvet. The main thing is that the material has high water-absorbing properties. Instead of a rag, special microfiber cloths are suitable.
• Wiper. The stores offer a wide selection of such devices, differing in cost, material of manufacture, functions. If the windows are high or you work on the upper floors, then it is better to choose a model where the handle extends. There are products with a sponge on one side and a screed on the other.
• Scraper. It should be used only in extreme cases and very carefully so as not to spoil the coating. Suitable for removing heavily soiled areas.

As for additional tools, this category includes various equipment that may be in the house.

• Steam generator. It not only cleans from dirt, but also disinfects the surface, helps to maintain a favorable microclimate in the room. Universal equipment can be equipped with nozzles for processing hard-to-reach places.
• Washing vacuum cleaner . It is used in external and internal works. It functions in such a way that dirty drips do not fall on the windowsill, floor.
• Magnetic brush. It is characterized by ease of use. Glass is treated with a solution of soap. The brush is fixed in one of the corners of the structure, then it must be moved evenly to the other corner. After removing it, wipe the glass with a dry cloth.

Let's not forget about safety equipment. Before washing windows without streaks, we select suitable clothes that you don’t mind ruining. Be sure to wear gloves to avoid the negative effects of cleaning products.

How to wash the windows in the apartment with folk remedies

New or old wooden windows are best cleaned with liquid products. This way we will not be able to damage the paintwork. "Grandma's" remedies are effective and time-tested: cornmeal, onions, table salt, flaxseed oil and much more. Our predecessors were inventive and tried a lot of options.

Vinegar and salt

Peculiarities . A streak-free vinegar-salt window cleaner is an ideal solution for those who do not want to use store-bought products and are worried about the health of others. Effective in application, provides the glass with shine and shine. In addition, it repels insects.

Application

1. Dissolve in warm water a couple of tablespoons of vinegar and salt.
2. Soak a sponge or cloth in the solution.
3. We wipe the glass. After that, use a piece of dry material or napkins.

It should be remembered that vinegar has a specific smell. Therefore, in the process of cleaning or after it, be sure to ventilate the room.

Starch and blue

Peculiarities . The components make it easy to wash large windows without streaks. Safe, environmentally friendly. We pre-stocked with a sprayer.

Application

1. One teaspoon of starch and a pinch of blue is provided for one liter of warm water. You can add a few drops of table vinegar to the solution.
2. Pour the resulting liquid into a spray bottle and apply to window structures. Wipe with a sponge.
3. Remove the remaining solution with a piece of dry material, a newspaper.

Instead of blue, ammonia is also used. For 4 liters of water, you need 50 ml of vinegar and alcohol, two tablespoons of starch.

a piece of chalk

Peculiarities . To prepare the solution, you need to acquire powdered chalk. An effective option that allows you to wash stained glass windows without detergent. Suitable for use on wooden, metal-plastic structures.

Application

1. For one glass of warm water, take two to three tablespoons of the powder. We prepare a thick mixture.
2. Apply to windows and leave until it dries.
3. Rinse thoroughly with water.
4. Wipe with a dry cloth or newspaper.

You can prepare a mixture in which we add vodka instead of water. It should be thick, like sour cream. The tool will provide the glass with a shine. In addition, alcohol removes fat well.

Potatoes

Peculiarities . 100th way without chemistry. A vegetable can clean even the dirtiest areas. We take raw potatoes and wash them well before use. The action of potatoes is similar to the action of starch with blue.

Application

1. Rub glass with half of a raw potato.
2. Wash off with water.
3. Wipe dry with a microfiber towel, cotton cloth or newspaper.

Potassium permanganate

Peculiarities . It is not used in insoluble form. The solution can be used for wet cleaning regularly, as it is safe for window structures.

Application

1. We dissolve potassium permanganate in water to a light pink hue.
2. We put on the glass, rinse.
3. We clean up the rest with dry material.

The folk remedy is safe, does not emit vapors harmful to the body. During the cleaning process, it is not necessary to ventilate the room.

soap solution

Peculiarities . One of the most accessible and simple ways. We give preference to laundry soap.

Application

1. Dilute the grated soap in warm water.
2. We apply it with a washcloth.
3. Wash off with cold water.
4. We do not leave streaks, so we wipe it with a dry cloth, newspaper.

If the structures are heavily contaminated, then we select the appropriate concentration. To completely dissolve the dirt, the solution can be left for a while, and only then washed off.

Ammonia

Peculiarities. The remedy is found in the home pharmacy. Otherwise, it is sold at the nearest pharmacy. Based on the reviews of the hostesses, the specific smell of alcohol remains in the room after cleaning. Therefore, be sure to ventilate your home well.

Application

1. First of all, you need to dilute ammonia to clean windows. Take one tablespoon and dilute in a liter of warm water.
2. For greater convenience, we use a sprayer. Pour the solution into it and apply it on the windows. We leave for a couple of minutes.
3. Wipe well with a dry cloth.

Glycerol

Peculiarities . In addition to glycerin (liquid), you will need a little ammonia. An effective solution for those who have installed new windows and want to keep their properties longer.

Application

1. Dissolve three tablespoons of glycerin in 50 ml of water, add a few drops of ammonia.
2. We apply the solution.
3. Wipe with a dry cloth.

A feature of the product is that it forms a protective film on the treated surfaces. It protects against dust, dirt and even minor mechanical damage.

store products

Folk remedies have a lot of advantages, but there is not always the time and desire to cook them. Merchandise comes from the store. Both inside and outside, windows are treated with liquid agents. Wooden, as well as metal-plastic structures, can be damaged by abrasives. The method of use mainly depends on the form in which the product is released. Before using this or that product, be sure to read the instructions from the manufacturer. Products can be applied neat or diluted. It is presented in the following categories.

• Sprays. They are applied to the surface and simply wiped with a dry cloth. Very handy for windows with bars. You can adjust the intensity and scale of spraying.
• Solutions. Diluted in water. With them, you can safely wash sliding windows without smudges. The main thing is to wear protective gloves.
• Gels and pastes. Apply in pure form. Wash off with plenty of cold water.

Cleaning steps

Sliding, stained-glass, blind, roof windows and other types of structures have to be cleaned of pollution. A common feature of the work carried out is their clear sequence. By following a certain order, you can achieve 100% success. First of all, cleaning is carried out inside the room, and then - outside.

1. Frames come first. Remove dust with a dry cloth. We do not use abrasive products, as they damage the primer, paintwork. Wooden frames, in addition to the above folk and store remedies, can be treated with cold tea brewing. After winter, you can find insects in them, so we use special products from living creatures.
2. First glass cleaning. We remove the dust. At this stage, detergents are applied. We choose the appropriate direction - from top to bottom or horizontally. In the presence of strong contamination, we pre-soak them with the selected agent, gently wipe with the hard side of the sponge. Adhesive tape may remain on the glass. We remove them with our hands, prying with a fingernail or a pointed object, without scratching the surface. Raw onions work well for fly stains. We clean corners and joints well, as dust accumulates most of all in them.
3. Second glass cleaning. This step involves rinsing and removing residues with dry cloths. We use cold or warm water. In general, abundant rinsing is required. With some methods, it is not necessary, since it is enough to wipe the surface dry.

During the cleaning process, you can simultaneously lubricate the metal fittings with machine oil or a special agent. To maintain the elasticity of the sealing gum, we use silicone grease.

We work at height

On the first floors, wet cleaning is not difficult. The stage of work is the same as when washing the inside. But what about those housewives who live on high floors? The main thing is to choose the right tools and observe safety precautions.

Suitable tools

In addition to the basic fixtures that were listed above, you will need special tools here. One of the main elements is a coupler or a mop with a long handle. They can qualitatively wash a blind window from the outside. Which mop to choose? It can be a wooden product on which we hang a rag. A metal mop designed for mopping floors is not suitable, as it will leave streaks.

There is a wide variety of screeds on the market, from which you can choose a model with different nozzles, handle lengths. A product where the last parameter is adjustable is best suited. Sponge and fiber nozzle - for removing light dirt. If there is a rubber water pump (scraper), then we remove dried spots, for example, drops of cement. After water procedures, the surfaces are wiped with a dry cloth.

To remove strong pollution, including dried pieces of plaster, waste products of birds, you can use ordinary soapy water. We simply apply it before using other detergents or sticking to a high concentration of soap.

Security measures

Often cleaning begins in the spring. In this case, you should wait until all the snow has melted, the frosts have stopped. We choose strong and reliable, stable ladders, tables or chairs. When cleaning on the upper floors, we do not stand on the edge of the window sill, we do not stick our bodies out.

If there is no practice of cleaning at height, the necessary tools, then it is better to use the help of professionals. Choose a cleaning company and order the service.

Good housewives try to clean windows quickly and on time without streaks. The right time for the first “general” in each new year is Maundy Thursday before Easter. Interestingly, our ancestors paid special attention to washing windows, believing that clean “eyes” of the home are the key to the well-being of the family. According to signs, when processing glass, you need to put coins into the water in order to increase the well-being of the family.