Let's start right off the bat. A secret that is carefully hidden by the owners of car dealerships and studios - you can cover the steering wheel of your Mustang with leather yourself. Even at home. Even without expensive car leather. Even if you don't know how to sew. Follow strictly step by step instructions, watch the video and believe in your own success.

Why leather?

• The leather steering wheel evokes a pleasant tactile sensation and is warm to the touch.
• The leather steering wheel is securely fixed in the hand, making it easier for the driver to react to unexpected road situations.
• A leather steering wheel looks restrained and elegant or young and playful, depending on the color and quality of the material.

Preparing materials and tools

For work we will need the following tools and materials:

• Narrow masking tape;
• Stationery cardboard;
• Roll of cling film;
• Marker with a thick rod;
• Nail scissors or stationery knife;
• Two hardened steel needles for leather;
• Durable synthetic thread of a suitable color;
• A pair of thimbles;
• Two-component leather adhesive;
• Home or industrial hair dryer.

Making a pattern for a leather braid on the steering wheel with your own hands

The steering wheel in each car has its own configuration and features, so we will experiment with the pattern. Remove the steering wheel and wrap the steering wheel with cling film. This material is elastic and fits perfectly onto the base. We evenly wrap a layer of masking tape on top of the film. We especially carefully treat the areas at the base of the knitting needles.

We carefully examine our work and decide how the skin will lie, how many parts we will divide the circle into, three, four or six. The proportions between the parts of the braid are a matter of your personal preference. The eyes are afraid, but the hands are doing. Using a marker, we draw the boundaries of future pieces of material onto the surface of the tape; the seams will run along them. We mark each part and assign a serial number.

Using a utility knife, cut the paper layers along the drawn lines. Using scissors we refine the shapes. We place the resulting templates under a press for alignment for a day. This could be a stack of books or a weight. If you don’t have time to wait, then iron the parts with a low-heat iron. We cut out blanks from cardboard according to the size of the templates, and be sure to transfer the numbering of the pieces onto them.

Please note: Let's reveal one more secret. If the cutting process seems too complicated for you, look at the market for “semi-finished” braids made of perforated or smooth leather. A strong needle and nylon thread are included in the kit. All you have to do is wrap the steering wheel yourself.

Choosing skin

Choosing a material for tuning is a fascinating process. Color scheme, combination of leather of different textures, price and availability of materials in stores... Black color is universal, it is an eternal classic of the genre, but it is unlikely to be appropriate in a beige interior. Choose soft leather, consider perforated options. This material is easily fixed by hand and has a high coefficient of friction.

Where to buy covering material? Go to an auto shop, visit fabric stores, or look at online store catalogs. The pattern of the product will tell you the required amount of leather.

Please note: Leather ALCANTARA Alcantara (artificial suede). Thanks to the adhesive base and protective adhesive paper, it is easy to work with. The pattern is drawn on adhesive paper, cut out with scissors, the protective layer is removed, the leather is stretched exactly to the shape of the steering wheel and glued in the right places.

How to cover a steering wheel with leather with your own hands: steps

1. So, the patterns are ready, the leather has been purchased, you can begin the process of covering. We lay out the templates on the wrong side of the material and, taking into account the allowance in the places where the pieces are sewn together, make markings. Leave allowances of 2-3 mm. Cut it out.

2. We stitch the joints of the leather flaps using a sewing machine. If desired, decorative stitches can be placed along the front side. Feel free to try the resulting model on your steering wheel. Check that the product fits tightly, without sagging or bubbles. Make any necessary adjustments.

Please note: Another secret to a perfect fit. To ensure that the seams at the joints of the pieces do not stick out, and the surface of the braid is smooth everywhere, it is recommended to use a stationery knife to cut shallow grooves on the steering wheel at the seams. Exactly the same recesses are made near the steering wheel spokes.

3. At the next stage, we tighten the braid with a strong nylon thread. For this we will need two hot steel needles and two thimbles. Start stitching from the joining seam. The threads come from both sides, crossing each other. Where the knitting needles meet, the thread is drawn from the back of the rim. To ensure that the braid lies as tightly as possible, do not forget to tighten the material.

Secure the tie at the start of the stitching with a high-quality double knot. In the case when the edges were stitched on a machine, the tie can be done with one needle, using existing holes for punctures. This seam will be more even and smooth.

Please note: the secret of strong fastening of knots of nylon threads. To prevent unraveling of knots and sagging of threads during work, wet them with superglue. You don't have to worry about the reliability of the connection of slippery nylon fibers.

4. The work is ready. You can dry the steering wheel with a hairdryer and return it to its place. If you still doubt that you can wrap the steering wheel yourself, experienced specialists share tips on how to simplify the process:

• Instead of a screed, place the parts on epoxy or rubber glue, use leather with an adhesive base. Thus, cutting errors will be less noticeable.
• You can pierce even holes along the edges of the workpieces using a sewing machine without threads. Your seams will be neat and even without hassle.
• Pre-moisten the skin in warm water, it will become elastic. Once dry, the material will fit more tightly to the base due to its reduction in size.

As you can see, covering the steering wheel with leather is not at all difficult. You just have to start and everything will work out. A leather steering wheel will give the car interior a stylish appearance and highlight your individuality.

June 3, 2019

Without exaggeration, we can say that the steering wheel is not only one of essential elements control of the car, but also the “face” of the vehicle interior. Therefore, the most common way to add attractiveness and individuality to the interior is by covering the steering wheel. Even a beginner can do it, the main thing here is patience and attention to every detail.

Materials and tools

Since the steering wheel is constantly in contact with the driver’s hands, when choosing material for the covering, you should pay attention to quality, strength and durability. There are many options - you can choose fur, artificial or natural leather, silicone, foam rubber or wire.

The most popular and practical is the braid made of genuine leather. This braid retains its appearance for a long time, is pleasant to the touch, has good performance qualities, and looks expensive and solid. You can simply wipe it with a damp alcohol wipe to remove dust. It is better to give preference to perforated leather. It is softer and, thanks to its pores, breathes better.

Important! You should choose car leather, not furniture leather, otherwise in a short time the work will go down the drain.

Before you start reupholstering the steering wheel, you should prepare everything necessary materials and tools. These include:

• leather;
• large needle for sewing (you can take a hardened one);
• durable nylon thread;
• thimble;
• stationery knife;
• masking tape;
• cling film (you can take packaging film);
• marker or pencil;
• medium density cardboard;
• glue or epoxy resin.

Wrapping procedure

Removing the steering wheel and old braid

Before starting work, you must remove the steering wheel using the vehicle repair and operation manual. Before dismantling, disconnect the battery! If there is an airbag in the housing, wait at least five minutes.

Remove the old braid. You can simply cut along the seam.

Creating a pattern and cutting out a new braid

Next you need to make a pattern. To do this, first the steering wheel is carefully, evenly, without differences in height, wrapped with film, and then tightly with masking tape. Using a marker, the future pattern is divided into four parts and a mark is made along the inside of the steering wheel for the inner seam.

Before cutting, you must number all the parts. Cut strictly along the lines!

Using the marked marks, you need to cut the masking tape and remove it from the steering wheel. It turns out four parts of the pattern. To level them, you can put a weight on top for several hours. Or make a denser template from cardboard, placing elements of masking tape on it.

Then, according to the sample of the resulting pattern, the elements of the future leather braid are cut out, and an allowance of 1.5-2 ml is made along the length. Each element must be marked. Do not forget that the final result depends on the accuracy of the work at the pattern making stage.

The pattern pieces are sewn together using a sewing machine or a needle and thread. It is necessary to retreat from the edge by 2-3 mm, otherwise the material will tear under tension. All parts are connected to form a ring. The finished ring is applied to the steering wheel. Everything must fit exactly to size. If the braid runs along the steering wheel, it is necessary to sew it along the seam. For additional fixation, the steering wheel can be lubricated with glue or epoxy resin.

Fastenings for manual sewing of braid

After this, you need to make fastenings that will hold the seam connecting the edges of the braid.

There are two types of fastening:

• holes;
• stitches along the edges of the product.

Holes along the edges of the braid can be made manually using an awl, or using a sewing machine with a needle without thread with a rounded tip.

The number of holes should be the same on both sides, the distance from the edge is approximately 4 mm, between the holes 4-5 mm. The work is quite labor-intensive, you should get about 600 holes.

The second method is much simpler - just use a sewing machine to make a stitch along the edge of the braid with a stitch in increments of 5-6 mm. The distance from the edge of the product is 4 mm.

All knots are made from the inside and secured with no more than two stitches.

Sewing the braid on the steering wheel

There are many options for braid lacing. The choice depends on the type of fastening and personal imagination. The simplest is to lace up like sneakers, threading a strong thread into the prepared fastenings. You should start from the bottom and move counterclockwise, carefully straightening the folds and stretching the material well.

Reference! If in some place it was not possible to straighten the skin perfectly, you can use a hairdryer. When heated, the skin becomes more elastic and small wrinkles are smoothed out.

After finishing the trim, you should hide all the threads under the leather, glue the knots with glue and run a hairdryer along the entire length of the steering wheel so that the leather fits better to the steering wheel. All seams can be coated with special leather glue. This will prevent them from unraveling.

Caring for leather braid

If the steering wheel is covered with leather, then it requires special attention, because dust and dirt easily accumulate in the pores of the leather. This affects not only the appearance of the steering wheel, but also the health of the driver. To clean, you can use special leather products or make your own, for example, mixing warm water with shampoo to wash the car body.

To extend the service life of such braiding, you should use special means that cleanse and moisturize it. Such products always contain special filters that protect the skin from fading.

Of course, making a leather braid with your own hands is much more difficult than buying a ready-made one. But on the other hand, you will be rightfully proud of your work, enjoying its results.

To make driving comfortable, many drivers buy special covers for the steering wheel. This modification creates convenience and makes your hands less tired. Plus to this in better side The interior of the cabin is changing. Today there are a lot of different offers on the market. However, you can tighten the steering wheel yourself. The most practical and convenient material for tuning a steering wheel is genuine leather. The use of artificial substitutes is not recommended. Since they do not have proper elasticity and wear out quickly.

Tools and materials for reupholstery

Covering the steering wheel with leather yourself involves using the following materials and tools:

To make a template (pattern), it is best to use cling film and wide masking tape.

Thick paper or cardboard.

A stationery or other sharp knife, marker or pencil.

Durable and high-quality thread, preferably nylon.

For safe and convenient sewing, you will need two thimbles for the middle finger.

Durable sewing needles made of hardened steel.

High quality soft genuine leather.

A screwdriver and a wrench to remove and then install the steering wheel.

To cover the steering wheel with leather yourself, it is advisable to use two types of material, perforated and smooth leather. The combination of two different textures will not only create an original and pleasant aesthetic appearance, but will also provide comfort for working with the steering wheel.

Perforated leather has increased elasticity. It is soft and comfortable to work with. Smooth leather, in turn, is more resistant to wear. Therefore, if you combine them together, you get a durable, soft and quite abrasion-resistant material. Experts believe that leather with a thickness of 1.2-1.4 mm is optimal for steering wheel covers. You can choose any skin color, it all depends on your taste. As a rule, the most popular cases are made of leather in dark shades. The most commonly used material is black.

Leather steering wheel template

In order for the steering wheel to be reupholstered with your own hands to a high quality, you must first make a pattern. To do this, first make a template from film and tape. First of all, remove the steering wheel, having previously removed the signal cover. Then unscrew the nut securing the steering wheel to the shaft and remove the steering wheel from the splines, swinging it in different directions.

After that, using cling film and masking tape, we make a model of the steering wheel and a template for the pattern. We wrap the steering wheel with film. We glue paper-based masking tape on top. Mark the places where you plan to make seams with a marker or pencil. Then carefully cut out the tape along these lines. The result should be four elements, one rectangular and three cross-shaped. We unfold all the details for the template and number them. After that, we place them on cardboard or thick paper and make patterns of a similar shape for the pattern.

Leather pattern

To make an original case, you first need to look through various sketches and choose the most suitable one. Of course, only four solutions can be implemented. However, you can make each sector from two or more elements, combining different textures or skin tones. Naturally, this will require more time and effort, but the end result is worth it. You can search on the Internet various options and choose the most convenient and practical. After you have decided on the design of the case, we place the pieces of leather on the table and make patterns using a stationery knife.

When making patterns, it is very important not to miss the next essential point. Each sector of the template is transferred to the skin not strictly according to its shape, but with a small margin. That is, after you have laid the template on the leather, you need to cut it out by 1.0-1.5 cm from the edge of the sector. This margin will be needed to ensure the necessary strength of the seams. Otherwise, after a short period of use, the seams will come apart, and you’ll just have to throw the cover away. As a result, you will need to reupholster the steering wheel with leather yourself.

After the pieces of leather are cut, attach them to the steering wheel and check that all sectors are cut correctly and match in size, taking into account the seam allowance. If necessary, all excess can be trimmed, because all patterns are made with sufficient margin. Once you are sure that all the elements are prepared and correspond to the design intent, you can start sewing.

Preparing a leather case

First, we lay out all the parts on the table in accordance with how they will be located in the case and begin to sew them together in the given order. The edges of the sectors must be swept to avoid tightening of the skin during use. The parts must be sewn together with strong nylon threads, departing from the edge at least 3 mm. All parts are sewn together completely in the form of a ring, with the exception of those seams that you previously marked with a marker.

After the workpiece is completely sewn and all edges are sewn, carefully pull the cover onto the steering wheel so that the joints of the seams are in the places of the cuts. We smooth out the material and eliminate sagging. Some experts advise “setting” the skin on glue or epoxy resin. However, in any case it is necessary to sew the edges.

Video - Covering the steering wheel with leather

So, now the most important thing to do is to tighten the edges of the cover so that it is securely fixed to the steering wheel. This procedure is very troublesome, time-consuming and requires a lot of time. First of all, you should decide on the place where the seam will begin. Here you first need to secure the thread, and then you can carefully sew. When tightening the edges of the cover in the area of ​​the signal cover, it is recommended to coat the edges of the leather with rubber glue.

There are many types of seams. However, the most popular are braid, sports and macrame. They look beautiful and form the most durable connection.

Once the cover is completely ready, you can install the steering wheel on the car. The cover may have minor creases. There is no need to worry about this. If you used genuine leather, then due to the increased elasticity of the material, all these flaws will completely disappear over time.

Covering the steering wheel with leather is one of the types of car tuning. Often car owners update the steering wheel after many years of use to improve appearance and driving comfort.

It also sometimes happens that a car is perfect in all technical characteristics, but the appearance of the interior is not pleasing. This is where tuning comes to the rescue, capable of remaking the car interior to suit all the taste preferences of the owner, as well as threads.

Covering the steering wheel is a creative process and must be approached responsibly.

After all, the steering wheel is what is closest to the driver and with which he is in direct contact while driving.

When making a tight fit, you can independently choose the type and color of the leather, as well as the type of seam and the color of the threads. Any combination is possible: it all depends on what kind of steering wheel the driver wants to hold in his hands.

Let’s take a closer look at what a steering wheel cover is and why it is needed

The steering wheel cover not only plays a decorative role, but can also improve the appearance of the car.

By the appearance of the steering wheel you can usually determine how old is the car, but if the steering wheel is new and beautiful, then it will not give out all the details about the car that it can. Also one of the most important characteristics is the thickness of the steering wheel, which, by the way, is discussed in this video:

Thanks to the constriction, this parameter can be adjusted to the individual preferences of the driver. It will not be possible to make the steering wheel thinner, but it is possible to make the steering wheel thicker 4-8 millimeters. It seems that the difference is not significant but this is 12%-24% of the usual steering wheel thickness.

Another reason for tightening the steering wheel may be the desire to make it soft. Before covering the leather, the steering wheel is covered with porous, soft polyurethane. Soft steering wheels are used in all BMW E65 and M-series.

Tactile sensations play an important role when driving. Choosing material for covering high quality, You get a guarantee that it will not slip and will hold well in your hands. This will definitely give you confidence when driving.

Let's summarize. Steering wheel reupholstery is not only a tuning element to improve the appearance of the steering wheel, but also a process that can improve technical specifications driving.

Types and options of covering + materials

• Steering wheel rim reupholstery

  

  The BMW E39 steering wheel rim is perfectly covered in white leather using a herringbone stitch.

  The most in a simple way is the steering wheel rim cover. In this type of work, only the rim itself is covered with leather or leatherette, and where it connects with the knitting needles, the material is sheathed and glued.

• Eco-leather steering wheel upholstery

  

  Eco-leather is an excellent material for covering the steering wheel. The main thing is that it is environmentally friendly.

  Eco-leather is an innovative environmentally friendly material.It is very difficult to distinguish it from genuine leather. The material is not very expensive, but high quality and reliable. Eco-leather is very elastic and fits the steering wheel perfectly, and the homogeneous structure of the material looks expensive and organic.

• Original steering wheel reupholstery, choice of threads

  

  If you are very creative and not like everyone else (and also love a blanket and coffee), this type of close-fitting is for you.

  The original (standard wrapping) is an absolute duplication of the factory wrapping of the car's steering wheel. This is an ideal option for those who are completely satisfied with their car and need a cover only for updating.

  Usually, when reupholstering the steering wheel in this way, genuine leather is used. Do not forget that there is only automotive leather and it cannot be replaced with leather for furniture or shoes.

  Automotive leather has special characteristics, such as:

  1. resistance to temperature changes;
  2. resistance to various types of mechanical and chemical damage;
  3. abrasion resistance.

  Upholstery is also possible according to your own sketches using complex geometry and expensive materials. For example, inserts made of expensive wood, which will make the car exquisite and unique of its kind.

The types of seams play a special role

It all depends on how I trim the steering wheel. Asian and American car manufacturers cover the steering wheel with four pieces of leather, resulting in four seams. German manufacturers do the same from one piece of leather, and there is only one seam.

Germans use macrame seam, it looks very aesthetically pleasing, smooth, it uses thin threads, and it does not lift the skin.


But Korean and Japanese manufacturers most often use a seam "herringbone" or "braid". These stitches raise the skin, causing it to become slightly convex; thick threads are usually used.


In principle, it is not particularly important which seam will be used, the main thing is that the work is done efficiently and painstakingly, and then the result will be high quality and beautiful.



Types and options of seams. Click to enlarge

Instructions for reupholstering a steering wheel with leather at home

There is another option for re-upholstering the steering wheel. With the help of step-by-step instructions, it is not so difficult to do it yourself. In order to get started, you need to arm yourself with everything the necessary materials and tools.

You will need:

1. 2 strong semicircular gypsy needles;
2. nylon thread;
3. stationery knife;
4. pencil or pen;
5. awl;
6. pliers;
7. roofing scissors;
8. cardboard;
9. marker;
10. a convenient place to work where you can secure the steering wheel.

To ensure everything goes well, follow the step-by-step instructions!

• To get started, we remove the steering wheel from the car, disassemble it, wash it and dry it to perfect condition. Before starting work, of course, you need to decide on the seam that will be used.
• The next step is to make markings. To do this, take cling film, wrap the steering wheel, then wrap it with mounting tape. We apply markings with a marker and carefully cut along the contours with a stationery knife. We remove and carefully smooth out the elements - this is our sketch.
• We attach the sketch to the skin, make markings along the edges, retreating 5 millimeters. This 5 mm will be used to tighten the skin. We cut out the elements and sew them into one large round ribbon.
• Soak the resulting product in warm water for twenty minutes. We wipe it, dry it, but not completely, and put it on the steering wheel. To avoid making mistakes, we handle the leather carefully, as it is wet and elastic and can be easily damaged.
• The next step will be marking. We apply it to the cardboard through every 8 mm lines. We apply it to the leather on the steering wheel and make holes every 8 mm with an awl.

  The work must be done gradually so that the seam is even. It is advisable to sew 10 holes on each side and then continue. Treat your work responsibly and slowly, otherwise you will get dressed up and redo the work.

That's it. Share, like, tell your friends,
Ask questions and suggest your options in the comments!

Keep reading
otherwise HE will stop you:

1. Zoya

   My review

   I never thought that covering the steering wheel with leather is so important for men... now from my own experience I can say that most men do it for their image - they want to show the level of their well-being and the solidity of their car. My husband did this out of necessity when he bought a less than new vehicle. I had to use my sewing experience and cover its steering wheel, it’s good that there were examples of various techniques in the article... now, instead of the usual suits and dresses, I make good money from this business. By the way, men really like soft leather, but seams don’t matter to them!

2. Natalia

   My husband reupholstered the steering wheel with leather himself. I used the instructions given above. It's good that there are such educational sites. The entire re-upholstery process is clearly outlined.
   Did it easily and simply. It even turned out very beautiful, and most importantly, it was comfortable. The steering wheel does not slip, the hand does not sweat. We would like to reupholster the interior in the future. This process is described on the website page.

3. Svetlana
4. Andrey

   We did a reupholstery last summer on the E60 in the M package. The steering wheel was trimmed. I chose the original leather as it was, but the color of the threads is in the M range: blue and red. It looked good. It looks like in the first video. And it was very pleasant to the touch, I didn’t want to let it go from my hands. I’m definitely in favor of re-upholstery!

   Oh, why didn’t I come across this article earlier! ?My husband likes the leather steering wheel, it feels good on his hand. And we recently did the fitting, but without instructions. I sat and sketched the steering wheel to scale, and then drew the patterns. It worked the second time. But since I found the instructions, I will do “work on the mistakes.” But somehow it turned out rather clumsily.

5. Laura

   Our Lada Eight was about 10 years old when my husband started thinking about re-upholstering the steering wheel. The plastic has become very worn out during use! We found soft black leather, we have an old Zinger sewing machine that does a great job sewing leather items. We carefully stitched according to a pattern we had made ourselves and made a mistake. We wanted to make it more beautiful, so we took it to a workshop, where we put metal rivets on the holes for the lacing. The case turned out beautiful! But when we removed it a few years later, it turned out that the rivets had severely scratched the steering wheel. Now they have reupholstered it with new leather, without rivets.

   Covering the steering wheel with leather yourself is not a very complicated process, which will save on hiring specialists. The first covering can cause some trouble.

Decorative design of interior elements

The steering wheel is the central element of the car interior, which is constantly in contact with the driver. Comfort while driving and general view car interior, so it is important that the steering wheel has high performance and visual characteristics. Re-upholstering the steering wheel will help make driving as comfortable as possible and the car interior stylish.
Often, at the same time as re-tensioning the steering wheel, at the client’s request, specialists from the AMD plus car studio re-re-tension the gearshift knob and parking brake handle. The interior of the car looks especially beautiful and harmonious when all the elements are upholstered in the same leather and decorated in the same style - this option provides a holistic design and adds individuality to the interior. In this article we will talk about the visual design of car interior elements using decorative seams.

A decorative seam for upholstery is an integral design element that connects the joined parts, decorates the drawn elements, and emphasizes the individuality and unique style of the car interior. Reupholstering the interior elements allows you to choose an option for decoration that perfectly complements the interior of the car and appeals to you visually.
You can choose classic color seam or bright contrasting one, repeat the standard decorative seam provided by the manufacturer, or choose an original, less common option. At your choice, the AMD plus car studio offers more than ten options for decorative seams for reupholstering the steering wheel and other interior elements, and more than twenty types of threads of different colors and thicknesses. The choice is yours!

12 types of seams to choose from

Most studios offer only 3-4 standard types of decorative seam designs when upholstering, from which it is sometimes difficult to choose suitable option. The AMD plus car studio team is confident that each car is unique, so especially for you we present an expanded line of decorative seams, consisting of 12 items. Choose the option you like and highlight your individuality!

Macrame seam

“Macrame” is an aesthetic decorative seam for reupholstery, which is most often used by German car manufacturers when covering the steering wheel rim. “Macrame” is made with thin threads, does not lift the skin and as a result forms an interesting ornate pattern. This is the most popular option among car owners.

Seam "BMW M"

The “BMW M” seam has the same technique as the standard popular “macrame” seam, but is distinguished by an unchanged color scheme of three shades: red, blue and light blue. This option is traditionally used in all BMW M-series, but if desired, it can be used as decoration for cars of any brand.

Seam "sport"

The “sport” seam is similar in technique to the “macrame” seam, but has a more frequent pattern. The main difference is that when making a “sport” seam, every stitch loop is caught, and when making a “macrame” seam, every second stitch is caught. “Sport” is most often used to decorate the interior elements of sports cars.

Herringbone seam

“Herringbone” is a popular decorative seam, which is most often used by Korean and Japanese car manufacturers. “Herringbone” lifts the skin, causing it to become convex and form a characteristic pattern. To ensure that the pattern is evenly convex and securely fixed when making a seam, thick threads are used.

Pigtail seam

The pigtail stitch is very similar to the previous herringbone stitch and is also found in most cases on Korean and Japanese cars. The difference is in the location of the stitches relative to each other - in a “pigtail” seam they are asymmetrical to each other and, when tied, form a characteristic convex pattern. The threads used for the seam are thick and dense.

Seam "BMW Alpina"

The “BMW Alpina” seam is a classic option that is used when decorating elements in BMW Alpina cars. The seam is made in a minimalist style and is distinguished by the unchanged blue-green color scheme. "BMW Alpina" will decorate the car interior and add a unique style to it.

Seam "Infiniti"

The Infiniti seam is most often used when decorative design elements in Infiniti cars. It is characterized by a minimalistic design and in the original version is most often found in white or black, but at your request it can be made in any color from those presented.

Seam "AMG"

The “AMG” seam is a stylish and unusual decorative seam that is used to decorate leather elements of powerful Mercedes-AMG sports cars. It looks beautiful when done in both contrasting and single-color versions and is suitable for decorating elements of cars of any brand.

Seam "Italy"

“Italy” is a seam that is most often found in cars of the Italian automobile industry - Fiat, Alfa Romeo. It is a seam in a strict minimalist style and visually resembles over-the-edge sewing. Looks equally stylish both in a contrasting color and in a color that matches your chosen skin tone.

Butterfly seam

“Butterfly” is a seam that, like “Italy”, is mostly found in Italian-made cars. It consists of individual geometric elements that resemble the number 8 or a butterfly, for which it received the name of the same name. Does not tighten the skin and looks original on interior elements.

Cross seam

“Cross” is a seam that is used quite rarely compared to previous options, but it looks no less stylish and interesting on the elements, forming a continuous line of rhombuses or crosses. The “cross” almost does not tighten the skin, forms a flat seam and is made of strong threads of medium thickness.

Step seam

“Step” is a flat, neat decorative seam that is made from medium-thick threads and does not tighten the leather on the steering wheel, gear knob and parking brake handle. It looks stylish and unusual both in a single-color design and in a contrasting bright version.

Contact the professionals!

The choice of seam depends on your individual preferences and the design features of the car interior. But the most important factor that is necessary to obtain a high result is professional craftsmen and high-quality, careful work. Therefore, to get neatly tightened interior elements with a perfectly smooth and beautiful decorative seam, contact the professionals!
Fantasize and choose the appropriate option, and the specialists of the professional car studio “AMD plus” will be happy to bring your ideas to life! We guarantee fast professional completion of the work and impeccable results!