How to make a balloon arch with your own hands. How to make an elegant arch from balloons with your own hands. Instructions for creating a balloon arch

Dear my readers!

The site provides only informational information for creating an original and beautiful wedding celebration. I'm not selling anything ;)

Where to buy? You can find and purchase the celebration accessories described in the articles at Special online stores where is delivery throughout Russia

Background of wedding preparations

One example prompted me to take on my own wedding. My sister’s wedding was six months earlier, when we calculated the final amount of her “chic wedding,” I had to calm my sister down for a long time, since with this money it was possible to organize two more similar weddings.

The organizers promised a “romantic gloss” and “exquisite shimmer of a wedding in the Art Nouveau style.” The decor that was ordered to decorate the cafe had been in rental stores for several centuries, and the “not fresh” colors of the fabrics were clearly visible in the photo. The garland of balloons left much to be desired due to unprofessional installation. The amount, of course, was taken to the maximum, and the decor was hung to a minimum.

Advice: when ordering any product, be sure to ask to see examples of personal previous work, and it is not necessary to pay 100% in advance, this will help you protect yourself a little from counterfeits.

Decorating the wedding hall with balloons

I chose a very light and fashionable wedding decor, which I could also do myself, without any special skills. I needed a large room, and not every restaurant could accommodate such a number of people. The dining room was designed for 170 people, and I just needed to accommodate 150. Since quite a lot of expenses went into setting the table, I spent a long time leafing through the business card holder, magazines, and Internet pages, looking for suitable decoration for the room. It would not hurt to decorate everything, since this room was built back in Soviet times(like all many).

When I saw photographs of rooms decorated with balloons, I couldn’t take my eyes off. Photos from wedding photo shoots look very bright against the backdrop of balloons.

Tip: to build an arch of balloons tied into a garland, you will need to purchase material from the wholesale market or from an online store. This way you will feel the price difference.

Materials for a ball arch

Let's move on to precise calculations. For the arch you will need:

2 packs of balloons white and 2 packs of red. (each contains 100 pieces)
Fishing line, 2 packs, only thick, otherwise you can seriously injure your hands.
Stationery carnations, buttons and paper clips. According to packaging.
Pump or compressor.
Calibrator (to control the size of the ball)
Stationery knife or scissors.
Hammer.
Decorative ribbon 1 reel (polyethylene, the one used for decorating flowers)

Advice: for this design, balloons of any manufacturer are suitable, it depends only on the impact of their quality on your personal time, since very low quality balloons can burst during the inflation process. Or in general, the number of defective ones in a pack may exceed the number of quality ones. Which can significantly affect the shape of the structure. It is advisable to take Mexican, German or Italian.

I bought a lot of balloons, and this helped me out a lot, due to carelessness, and also, of course, due to inexperience, several dozen balloons, I simply, trivially over-blowed them, and they burst.

Features of stationery items for making balloon arches

Scissors should have short blades, so it will be convenient.
Carnations with a plastic head, the longer the better.
The fastest and most convenient pump is a two-way one, I suggest purchasing the same one.

Step-by-step instructions for making a balloon arch

01. Inflate 2 balloons and tie them together.

But! Do not tie the balls together with a thread (as in the photo below), this is an old and incorrect way.

The balloons need to be blown to be extremely equal in size, only due to the fact that you tie together balloons of different sizes, the garland may not lay flat, and the whole structure will be very crooked, further arranging the balloons will become impossible.

02. For further work, you need to inflate 2 more balls, and do the same as with the previous ones.

You need to take 2 balls in one hand, and 2 in the other (by the centers - the tails), then connect them together, twisting them together. You will get a four of balls. You need to make several of these fours in advance. This is for convenience so that you can move on to the stage of tying the garland.

Advice: to prevent the balloons from bursting, try not to overinflate them or rub them together, this way you will prevent yourself from deflating them, already in a connected structure, which will save you from dismantling and replacing the deflated ones.

03. To the first four balls, you need to carefully tie a fishing line, winding it in several knots and rewinding it through each ball. Place the next four on this “flower”, but so that it lies evenly on it and fits into the grooves. She must lie with her balls in the spaces between the balls of the first four. After that, press it a little to the first one, and wrap it with fishing line 2 times, but no more and no less, because asymmetric tightening may occur. And your design will lose its shape.

And so, one after another, trying not to rub against the fishing line, in order to avoid micro cracks, rewind the fishing line between each other. You will arrange the garland to the desired length.

Advice: for a doorway, you will need 5-6 meters of arch; for convenience, it can be made of 2 parts, this is better for transportation. Afterwards, they can be connected to each other.

04. Upon completion of the binding, it is advisable to decorate it with a ribbon, which must first be twisted, with a knife or scissors. Chaotically hanging the “spirals”.

05. Installing the arch is not very easy; you must first drive the nails into the wall in the right places in order to tie a fishing line on them. You will need to attach the garland to these pieces of fishing line, making loops out of them, this will be more reliable. You don't need many loops, preferably two at the ends and one at the bend.

For the full effect, you will need not to feel insecure and not spoil your mood, then everything will work out, and the result will exceed all expectations.

No holiday is complete without balloons; this is undoubtedly the most integral attribute of a holiday party. Therefore, an arch made of balls is a wonderful choice, and a do-it-yourself arch made of balls, step-by-step instructions for creating which are presented in the next master class, is simply an excellent option!

Balloon arches look very festive and cute, which is why such arches are often used as decorations in banquet halls for birthdays and anniversaries, weddings and corporate events. I often want to put up an arch made of balloons for a home celebration, but the craftsman’s work is quite expensive. So why not make your own balloon arch? Let's try to figure out how to build an arch ourselves!

Materials needed

Before you start work, you need to stock up the necessary materials. These include:

Directly balloons. Decide whether the arch will be monochromatic or multi-colored, and also select matching colors. It is also important to understand how many balls you will need. On the street it is better to make large balls (30 or more centimeters); for indoors, balls measuring from 12 to 25 cm are suitable. Their number will depend on how large the arch you want to make, so it is better to stock up on a sufficiently large number of balls. It's better to have them in stock than to run to the store for more. On average, 20 large, 30 medium or 45 small balls are needed per meter of garland.
Pump. You'll have to inflate quite a bit large number balls, so you’ll hardly have to rely on your own strength. We advise you to purchase a special pump, which can easily be found in holiday supply stores or even in regular construction supermarkets.
Fishing line, wire, hose. In general, this is what the garland of balloons will be held on. The material for the base depends on whether the celebration is being held outdoors or indoors. But in any case, it is also worth having such material in reserve.

Basic option

Of course there are many different ways weave the balls together to create a garland, but first let’s look at the basic one. These are two elements, “two” and “four”, which together form the combination “two-four”.

Blow up two balloons of the same color without tying the tails.

To make sure that the balls have the same diameter, you can use a pan of the appropriate size. If the balls fit freely into the pan, they need to be inflated a little, but if, on the contrary, they do not fit, they need to be deflated.

Now that we are sure that the balls are the same size, we need to cross them together, twist them and tie a knot.

For a two-color garland, you need to make a four from two pairs of balls of different colors and twist them so that one color is opposite the other, and the colors alternate in a circle. The following photo shows possible options two-color design of a garland of balloons.

Easy way

Of course, the most in a simple way will buy such an arch, but since we are talking about the fact that we can make it with our own hands, we will consider another, no less simple method.

First of all, we need to make the base for the arch. To do this, we will use a strong, rigid hose and small cinder blocks to secure it to the ground, in case the party is taking place outdoors. It is enough to arrange the blocks at the required distance, and secure the hose to them, additionally wrapping them with electrical tape for greater strength. To make the blocks more stable, they can be filled with gravel or sand.

If the party will be held in the house, you can use ordinary wire of medium thickness, it is quite stable, or even thick fishing line.

Next, inflate the balloons (it doesn’t matter with helium or regular air). The balls should surround the arch on all sides, so first inflate about a dozen, attach to the base to understand how many more balls you will need.

And finally, it's time to tie the balls to the base. You can use the basic pattern of weaving the balls or tie them one at a time, the main thing is that the balls are tightly enough to each other, there should be no empty spaces.

Balls are considered one of the most versatile holiday decorations. It doesn’t matter where the event will take place: in a restaurant, on the street or at home. The most striking and standard way to create a colorful atmosphere at a wedding, birthday or banquet is a balloon arch.

Today, many options for such a design are offered by companies specializing in its manufacture, however, the sums for performing such work are not small, so for those who want to save money and celebrate a significant event in a fun, comfortable and colorful way, we suggest making an arch from balloons with your own hands.

An arch made of balls can be of completely different colors. Classic white color or a combination of white and red - the most common tones at wedding events, cheerful orange and bright yellow are used mainly at children's parties, birthday or anniversary, lovers modern design stick to contrast, etc.

An arch made of balloons filled with helium looks very beautiful, but you can do without it; In both cases, the work does not require large amounts of money or any skills; even a beginner can cope with it. Enough to purchase necessary materials(balls, pipes for the frame, decorative elements), decide on the shape and color scheme and follow the instructions.

DIY balloon arch in the form of flowers

For the frame, you need to purchase metal-plastic pipes, for decoration, balloons of any shade and braid. From the available tools you will need: a centimeter, a knife or scissors and a cardboard box with two round holes (1st by 15 cm, 2nd by 21 cm).

Metal-plastic pipes must be of the following sizes:

2 pieces one and a half meters long with a diameter of approximately 26 mm (for racks);
4 pieces 3 meters long 75 cm with a diameter of 16 mm (for legs);
1 piece exactly 3 meters long with a diameter of 16 mm (for an arc).

Gallery: arch made of balls (25 photos)

Instructions

We make a frame. We take short pipes and bend them so that we get legs for the arch. Then we glue them with tape to the posts, make an arc and later secure it in the same way.
To make the frame heavier, we attach balls to the legs (we fill the balls with water so that the frame does not fall).
We begin to inflate the first five balloons of the same color. Using a cardboard box, we form the dimensions (the size of all 5 balls should be 21 cm).
Then inflate one ball of a different color (this will be the center of the flower) measuring 15 cm.
Using braid, we connect all the balls, forming a flower out of them. The first part of the flower can be considered ready.
Making the second part of the flower. Inflate the next 5 balloons of the same color and size as the previous balloons. In this case, making a core is not required, so we connect them without a core.
To make our flower more voluminous, we connect the connected parts of the flower to each other.
After this, we place the flower on the arch, passing it through a metal-plastic pipe (arch and posts).
In the same way, we form the finished flowers (you can only change the color, the shape should be the same) and place them on the arch tightly to each other.
By the end of the work, gaps will appear at the bottom of the frame, which must be filled with flowers of 4 balls (petals) measuring 21 cm.
To give the arch a completely finished look, you need to place the flowers on the same plane. After this, you can consider the decoration of flower balls complete.

Adviсe:

For the base (frame) of the arch, you can use other methods, for example, making a design from twine;
if you make all the flowers of the same type (for example, white petals and a yellow core), then the arch will turn out to be in the form of beads or pearls; looks original and great for a wedding.

To make a spiral arch with your own hands, you will need the following materials: thick fishing line, paper clips, compressor or pump, calibrator, scissors, hammer, decorative tape and strong balls of 2 colors.

Instructions

Blow up two balloons of the same color and size and tie them together without using any strings etc.
Then do the same with two balls of a different color.
Place the connected flower-shaped balls on top of each other, then twist them together (you will get a tight “four”).
Make several of these “fours”.
We begin to attach the balls to the fishing line. Take the first “four” and tie a fishing line to it (wind through each ball and make several knots).
Then do the same with the remaining balls, stacking them tightly and evenly on top of each other. Tie the next balls with the first “four” by twisting the fishing line, but no more than 2 times, so that the balls evenly fold into the grooves and form a color spiral.
When all the balls are placed on the fishing line, decorate its base with ribbon (if desired, you can decorate the entire fishing line).
After this, proceed with the installation of the arch. Drive the nails into the wall or door so that you can tie a fishing line around them in the form of loops. Carefully pass the finished garland through the loops and shape it into an arch; secure well.

Adviсe:

do not overinflate the balloons or rub them so that they are free from cracks and do not burst; careful handling will save you from replacing deflated balloons and dismantling them;
for decoration on the doorway, proceed from the calculations of 5-7 meters of the arch;
For ease of fastening and transportation, it is better to make a semi-arch of 2 parts that can be connected during preparation for the holiday.

Making such an arch is not difficult. It is necessary to determine the color of the balls in advance, and the shape will be in the form of droplets. Also calculate how many balls you need to fasten together.

Inflated balloons of the same size must be tied one after another to a rope, without allowing any gaps; you can alternate colors.

After all the balls have been tied, attach the finished garland to the wall or door using nails in such a way that an arch has formed.

Adviсe:

in this case, it is not necessary to use helium, balloons filled with air will also hold well, the main thing is to eliminate gaps;
To be sure, you can connect the balls together with transparent tape.

The air arch is also considered the simplest due to the balls, filled with helium and air in equal quantities, since they will have balance and compact the structure. It turns out to be a beautiful cascade of balls. The only downside is that it is not designed to be placed outdoors.

An arch created from helium balloons looks attractive and festive. That is why this type of decoration is so often used to decorate banquet halls where a wedding celebration is planned. In a situation where the arch is “built” by professionals, you have to pay dearly for the service. Is it possible to make decorations with your own hands? Of course yes! Creating a balloon arch with your own hands for a wedding guarantees the strength of the structure. In addition, we have the opportunity to select color scheme decoration in accordance with the theme of the wedding.

Making an arch from helium balloons for a wedding in a simple way

In order to save time on the construction of the structure, it is recommended to prepare a ready-made base in advance. A metal frame can be purchased, for example, at a garden store. It is usually a stable wire structure. You should measure in advance the width and height of the opening where the holiday is planned.

If the house has a cinder block or a long rigid hose, it is quite possible to make the frame yourself. The structure must remain stable. It is recommended to add sand or gravel to the recesses where its rods will be inserted. Some tie the arch to nearby objects (trees, doors, fences, etc.). The balloons are filled with helium or air, which gives them a certain shape. There should be enough balls to completely hide the metal frame. It should be taken into account that there may be wind outside, the balls will change position. Gaps and empty spaces on the frame should be avoided.

Making an arch from helium balloons on your wedding day in a complicated way

We offer another option for constructing a balloon arch with your own hands. You need to prepare a thin rope in advance. It is carefully laid out on the ground, taking into account the desired height and width. A couple of centimeters should be left free for fixation. Loops are made at the end of the rope on both sides. This will make it easier to secure the structure. Take one edge of the rope and temporarily strengthen it. They begin to tie inflated balloons onto it as close to each other as possible.

The opposite edge of the rope remains free for now. It is convenient to fix the balls on a rope with floral wire or tape. For reliability, the base of each ball is wrapped with a fixing agent in several layers. So, attach the balls to the end of the opposite border. Thanks to the air, as they are fixed, the balls will rise without clinging to objects on the floor or the surface of the earth.

Next, it is recommended to additionally wrap the rope with balls with decorative ribbons, corrugated paper, bows. The color scheme of the ribbons should match the main color of the balloons, the room, and the theme of the wedding. This will allow you to achieve harmony in the arch. Now the end of the opposite side should also be securely fixed. The base of such an arch can be easily adjusted to achieve the desired height. The edges of the arch are decorated with flowers.

Useful recommendations for those who make a balloon arch with their own hands

Our simple tips will help make the process of making an arched vault easier.

To facilitate the process, it is recommended to purchase a special helium cylinder.
If it is planned that the arch will be multi-colored, it is important to think in advance about the combination of certain shades. To make the vault especially original, use balls in the form of spirals or stripes.
It is recommended to start creating the arch, namely filling the balloons with helium, a few hours before the celebration. After about 10 hours, the balls usually begin to lose their “shape”.
It is necessary to securely fasten the balls to the arch to prevent the structure from falling apart during the ceremony.

Decorating an arch made of flower-shaped balloons

This arch is ideal for decorating a room where a children's party will take place.

Making a vault with balls is a simple process. How to make an arch from “inflatable” flowers? Creating bright colors from balloons is fashionable and fun. We suggest giving preference to a metal frame as a frame for a flower vault. It should be firmly fixed in the ceiling or doorway area.

The weight can be balloons filled with water, which are secured with tape. Flowers will look neat if their tails are tied together. It is necessary to prepare a certain number of flowers in advance. For children, choose bright colors: red, yellow, green, blue. For a wedding - calmer, pastel colors. For example, silver, gold. Additionally, the hall is decorated with ordinary balls and long curly ribbons. Separately around the festive hall, “beds” of airy “flowers” are made.

Recently, balloons have become a decoration for any celebration from birthdays to weddings. And designs made from balloons look beautiful and solemn. Our master class is devoted to creating an arch from balloons with your own hands.

When forming an arch, it is better to use two colors. In this case we have a red and white color scheme. Photos against such a background will turn out very beautiful.

Materials for making a do-it-yourself balloon arch

So, you will need:

white balls - 200 pcs;
red balls - 200 pcs;
compressor or pump;
fishing line - 2 packs. It's better to take a thick one;
hammer;
stationery nails – 1 pack;
stationery knife;
scissors;
buttons – 1 pack;
decorative tape – 1 reel.

It is better to buy balloons with a reserve, since they may burst during the inflation process. If you have never inflated balloons, we recommend watching the video tutorial.

It is also worth using a calibrator so that all your balls are the same size.

The main thing at this stage is the choice of balls. It is better to choose balls made in Germany, Mexico or Italy. They are of good quality and therefore there will be less defects in your work.

It is better to choose scissors with short blades. This will make your work easier. It is better to take stationery nails with a plastic cap. The longer the carnations, the more convenient it will be to work with them.

It is better to choose a two-way pump. It is fast and easy to use.

The preparatory stage is over, let's start forming the arch.

DIY balloon arch: step-by-step instructions

First, inflate two balloons and tie them together. For this we don't need any thread or ribbon. We tie the balls by their tails. All balls must be the same size, otherwise the final design may turn out crooked.

Then we inflate two more balloons and tie them by the tails. Now we tie four balls together. To do this, we take two balls by the tails in one hand and in the other. Then we connect them together, twisting them together. You should get a flower with four petals. You need to make several of these flowers. They will be needed when forming the arch.

To prevent the balls from deflating, try not to rub them against each other.

Tie a fishing line to the first flower (four balls). You need to wrap it around each ball and make several knots. You need to lay the next one evenly on this flower so that it fits into all the grooves. The second four balls must be placed in such a way that there are no gaps between the balls. Now slightly press the balls together and tie them twice with fishing line. Try not to press them too hard, otherwise asymmetrical tightening will occur and the structure will lose its shape.

Thus, trying not to rub the balls against each other and without tightening the fishing line, we form our arch.

You will need 5-6 meters of structure for the doorway, so it is better to make it in two parts. This will make them easier to transport. And you can easily tie the two parts together at the venue of the celebration.

After you have finished forming the arch, we begin to decorate it. To do this, take the previously prepared tape and scissors. Cut a piece of tape and twist it into a spiral using scissors. Make several of these spirals and hang them around the arch in a chaotic manner.

Installation of a ball arch

Now let's proceed to the most important and difficult stage - installation of the arch. First you need to make marks on the wall where you plan to hang the arch. You need to drive the nails in according to the marks and hang the fishing line on them. The fishing line must be tied in such a way that small loops are formed. We will attach our arch to these loops.

It is not necessary to make many loops; just two at the base and two at the bend. On the arch itself, in appropriate places, we also make small loops from fishing line. Then you need to connect the two loops and secure them with buttons. Our arch is ready.

Using the same pattern, you can make garlands for your holiday. And also decorate the hall with flowers from balloons. For a garland, as for an arch, it is not necessary to use balls of only two colors. You can make them multi-colored. If you want to add a touch of humor, you can use balloons with smiley faces or funny faces. You can also choose balls with small led lamps inside. Such light bulbs do not shine for long, but a design with luminous balls will look especially beautiful at an outdoor ceremony in the evening.

If you're worried about balloons deflating, you can pre-order helium-filled balloons. An arch made of such balls will last for several days. And making an arch from already inflated balloons will be much faster and easier. And the size of the balls in this case will also be the same. Ordering such balloons will greatly simplify your work.