Night, darkness - not everyone likes this environment, which is why night lights were invented. Children are afraid to be alone in dark rooms, and night lights have always helped to brighten this atmosphere. If you make it unusual, children will go to bed with great desire.
There are many different handmade night lights, and today we will show several options.
Night light made of wooden sticks.
We will need:
Wooden sticks, you can choose the size as you wish;
PVA glue (or other wood glue);
Socket and light bulb;
The mount (base) for the cartridge can be made from corrugated paper;
1. We take our sticks and glue them into squares. We will need about 25-35 of these squares.
2. We cut out the base for the cartridge from cardboard. The size corresponds to the size of the stick squares.
3 . We make a hole for the cartridge.
4. Depending on the size of the cartridge, we glue together several squares and cardboard, which will serve as a stand for us on the table.
5. We begin to build our lamp by gluing all the squares one by one. We stack them on top of each other in any position.
6. We insert the lamp socket and our lamp is ready!
How to make a night light “Starry Sky”?
The starry sky is a mystery that has always attracted our attention and our gaze. Now, thanks to the night light, you have the opportunity to enjoy starry sky without leaving home. From the material, you will only need things that every home has:
Sheet of foil;
- jar with lid;
- flashlight;
- awl;
- scissors.
1. Take a sheet of foil and carefully make holes with an awl. If we want to get a full-fledged night sky, then we can use a star map.
2
. We cut off the excess foil, leaving the dimensions suitable only for the jar, the height of the sheet is equal to the height of the jar.
3 . We twist the sheet and insert it into the jar.
4. We put a flashlight on the bottom, turn it on and close the lid.
Enjoy the starry sky!
How to make a beautiful night light for your bedroom?
In order to make such a wonderful and beautiful night light, we need:
Jar (glass or plastic) with a lid;
- lace fabric;
- a small flashlight;
- scissors;
- sewing machine.
1. Using a centimeter, take measurements from the jar. We need to know the exact dimensions to sew the overlay fabric correctly.
Modern night lights are convenient and ergonomic lighting sources. They complement the interior of any room well and can become a real decorative element. In a children's room, a night light will help the baby feel safe, and a hand-made lamp can also be presented as a handmade souvenir.
Benefits of a night light
The advantages of a homemade lamp can be considered the following points:
- creating a special pleasant atmosphere on the eve of sleep;
- the ability to navigate in the dark without waking up family members with the main light;
- reducing children's fear of the dark;
- energy savings;
- adding decorative elements to the overall interior;
- additional visual effects to develop children's imagination.
Night light “Starry sky”
One of the most current and romantic night light models, to one degree or another, imitates an endless cluster of constellations in the night sky. You can make such a light source yourself from scrap materials. It does not need to be connected to the network, because a regular flashlight with little batteries is enough.
To create such a night light, you need a glass jar with a lid of any size, thick foil, scissors, an awl, a small flashlight and any surface that is not afraid of damage, for example, a tray.
- Draw a star map on the foil. You can arrange celestial objects schematically or following the real arrangement of stars. It all depends on your desires and level of effort. If you are making a similar night light for a child, you can limit yourself to the image of the constellations Ursa Major and Ursa Minor.
- Place the sheet on a flat surface and use an awl to make holes. These will be the luminous stars.
- Trim the foil so that its height matches the height of the jar. Roll the sheet into a tube and insert it into a glass container.
- Place a flashlight at the bottom of the jar and turn it on. The walls and ceiling will immediately be illuminated by the beautiful glow of the night light.
There is another option to make a children's night light that imitates the night sky. It can be made from an ordinary tin can. Such a container should be cleaned, the label removed, painted in any pleasant color and several holes made with an awl. Inside the jar you need to put a flashlight, a garland or a lit candle. It is advisable to cover the edges of the jar with a plastic lid so that none of the family members are injured.
This version of the lamp can be an ideal romantic gift or bedroom decoration. To make a night light with your own hands, as a decorative element and a light source, you need to purchase a lace fabric. It can have different colors and patterns, depending on your preferences. You will also need a dry and clean jar, scissors with thread, and a flashlight with batteries.
- Wrap the container with lace so that it does not protrude beyond the edges and does not overlap the edges. Remove excess parts.
- Sew the edges of the lace to create a sleeve that matches the diameter of the jar. You can work on a sewing machine or by hand.
- Place the sleeve on the jar, place the flashlight inside and screw on the lid.
Using available materials, it is quite possible to build a large homemade lamp that can decorate not only a nursery or bedroom, but the entire room. To create such a miracle, you will need an original tin or plastic jar from under the tea. You also need scrapbooking paper, stationery cardboard, a paper knife, acrylic paints, glue, sandpaper, and masking tape. And since in this case we are making not just a night light, but a lamp, we need to prepare a light bulb socket, an incandescent light bulb itself, a power cord and a switch.
- Cut out a sheet of scrap paper that can be used to completely wrap the jar. Please note that the bottom of the tea bag will be the top of the lamp.
- Remove the lid from the jar, lean it against a piece of paper, trace it with a pencil and cut it out.
- Connect the cut out template to the wrapped jar using masking tape. Trace a circle with a pencil.
- Cut out the window according to your markings. Sand the edges with sandpaper.
- Re-trace the oval template onto the cardstock. Draw stripes inside it and cut out some of them.
- Glue the cardboard to the jar on the inside.
- You can decorate the outside of the jar as you wish, using paper, cardboard, acrylic threads, lace, etc.
- At the back of the lamp, cut a circle for the power cord. You need to make a hole in the lid for the cartridge.
- Assemble a socket with a light bulb, a switch and an electrical plug into a circuit.
- Place the socket in the jar, screw in the light bulb.
- Assemble the lamp and check its operation by plugging it into an outlet.
Night light for a child
When creating a lamp for a children's room at home, the most important thing is to use your imagination as much as possible. In addition, you can involve your baby in creating a night light and combine business with pleasure.
Prepare a glass ball or spherical shade for the lamp. You will also need large number tulle or tulle, glue and several flashlights, and better than a garland for the Christmas tree.
- Cut out a large number of small circles from the fabric.
- Take a dry and clean lampshade, gather circles of tulle or tulle into a “rosette”. Fix the fabric flower on the lampshade with glue, dropping just a little into the very middle of the rose. This way you will create a fluffy ball.
- Place a flashlight or inside the lampshade. Show the result to your baby and watch his joyful reaction.
LED night light
To make an unusual and beautiful LED night light that can be placed in a nursery, you need to prepare a pair of transparent plastic tubes with unequal diameters. You will also need LEDs with the desired brightness and color scheme. Also prepare glass pebbles, wire, a larger cork, superglue, pliers and a board for the LEDs.
- Bend the ends of the LEDs with pliers.
- Connect all LED bulbs with a piece of wire in a parallel circuit, observing polarity.
- Connect the ends of the wire to the board.
- Check the working part of the night light, if the LEDs get very hot, add a resistor to the circuit.
- Glue the tubes one into the other. Place decorative balls into the void.
- Place the LED plug onto the tube. If the diameter of the plug is larger than the tube, make a seal from a leather belt.
- The LED night light is ready, you can turn it on.
Safety of night lighting
As is clear from the above examples, there is huge amount designer models of homemade lamps. There are different techniques for working with decorative materials to create a variety of lighting effects.
However, behind the beauty of the night light, you should not forget about the safety of yourself and your family. To this end, you should be especially careful when considering the power supply circuit for the light source.
Many home craftsmen believe that compact nightlights have minimal power and low voltage, which in itself should protect against problems. This is not entirely true. A voltage of 12 volts for a halogen light bulb or 3 volts for an LED power supply does not pose a threat to the human body. However, if a short circuit occurs, an electrical arc will form at the point of contact. At the same moment, a current will pass through the wires, which can heat the insulation to the point of fire. In this case, the power supply may operate in overload mode, but the shield will not react. That is why it is necessary to protect the wiring of such light sources with a fuse. After the electrical wiring at the output of the power supply is protected, you need to pay attention to the electrical safety of the board itself. It is enclosed in a reliable housing, which is especially important for lamps in children's rooms, where children may try to disassemble the night light.
This article describes the most interesting master classes on creating your own unique night light.
Almost all children love to fall asleep under the mysterious and soft light from a night light. But what can we hide, even adults like the cozy atmosphere it creates. And it’s even more cozy to build a night light yourself!
Do-it-yourself night light floating in the air: photo, description
In order to make such a night light with your own hands, you will need:
- A hacksaw designed for woodworking, or a jigsaw as an alternative
- An ordinary drill or screwdriver with a set of drills
- Glue gun
- Paint for woodwork white along with a brush
- Scissors
- Sandpaper
- Wooden slats. One needs to be selected so that its length is equal to 210 cm, and according to the parameters - 1.5x1.5 cm. The length of the second should be 60 cm, and the parameters are 3x3 cm.
- Lamp with fluorescent or LED socket
- Power cord equipped with switch and plug
- A4 paper - plain white
- Transparent multi-colored plastic
IMPORTANT: If this is difficult to find, you can purchase the most ordinary colored paper folder at any office supply store.
You can get started:
- First of all, pieces are cut out of the slats. You need to make 8 pcs. By 1.5x1.5x13 cm, 3 pcs. By 1.5x1.5x25 cm, 1 pc. By 1.5x1.5x23 cm, 4 pcs. By 3x3x12 cm.
- Now the pieces with sides along 13 cm need to be glued with the blocks along 25 cm. You need to use glue for connection. You need to hold the frame at least 5 minutes, Otherwise, good gluing will not work.
- Further bars along 23 and 25 cm glued to the bars 13 cm.
- Now you can build base. These will be pieces 12 cm– they need to be glued together.
- Frames are glued together among themselves, as a result of which the master receives a cube.
IMPORTANT: It is necessary to allow time for the cube to dry. It is preferable to press it down on top with weights - this way the gluing will be better.
- After the workpiece has dried, you can start making holes under the power cord.
- You need to remember that the holes are definitely worth clean with sandpaper.
- Next is do the stand. Marking it correctly is almost the main task of the master. Here lies the answer to the question of how the night light is going to float in the air. The point is that the cube should move slightly relative to the base, and the latter should not be noticeable as a result. You will get the optical effect of floating in the air.
- Then the base and cube are glued together and left for some time to dry.
IMPORTANT: If you glue the base and the cube together incorrectly, all the zest of the idea will be lost. Therefore, it is very important to pay special attention to this stage.
- Now you can paint the workpiece white paint. Everything is painted - both the frames and the bottom.
- Next you need to awaken the electrician in you, passing the wire into the previously made holes, collecting the cartridge and connecting the wire.
- The wire is fixed hot glue from a gun.
- The cartridge is also glued. But already to the base of the workpiece.
- Sheets are cut out from colored folders, equal in parameters to the sides of the cube. These will be light filters. They are glued to the sides of the cube so that they end up from the inside lamp
- But front part pasted over with regular paper.
DIY night light in the form of a starry sky: master class, photographs
This type of night light is very popular. In order to create it, you will need:
- A jar made of glass and equipped with a lid - preferably cylindrical in shape
- Battery-powered pocket flashlight
- Thick foil
- Awl, scissors
Making a night light with your own hands is easy:
- Cut from a sheet of foil workpiece, equal in height to the jar and in width to its circumference.
- Made in foil holes, which will later become stars on the walls.
IMPORTANT: If you want to create not just chaotic stars, but real constellations, you can cut them out purposefully. Then the night light will also be educational.
- The ends of the workpiece are glued and placed inside the jar. The jar should ultimately be completely sealed from the inside with foil.
- Foil sticks to the inside of the can.
- Then it remains put a flashlight on the bottom and turn it on at night.
DIY night light from a tea can: description, photo
Surely many people have unnecessary containers in their home. For example, tea jar. It also makes a great lamp. You just need to stock up on the following things:
- With the jar itself
- A sheet of scrap paper that matches the parameters of the jar
- A sheet of cardboard
- Acrylic paint
- Sandpaper
- With a knife
IMPORTANT: You need not a kitchen knife, but a knife for office work.
- Masking tape
- Superglue
- Incandescent lamp and socket for it
- Power cord and switch
Now you can start making a night light with your own hands:
- If the sheet scrap paper more necessary parameters, then you need cut the required piece for a jar. It is necessary to take into account that the top will also have to be decorated. The point is that the jar will be upside down and the bottom will be up.
- Sheet sticks per jar.
- Next from plain paper an oval is cut out. For convenience, you can circle the lid of the jar - it should just have an oval shape.
- Cut out oval attaches to the side of the can using masking tape.
IMPORTANT: You must remember to circle the oval with a pencil.
- Further along the outlined contour a window is cut out right in the bank.
- edges are being cleared sandpaper.
- Now To clean slate paper the same oval is applied again. It is outlined and cut out, but only inside should stripes remain.
- This oval is worth glue to the inside of the jar so that it covers the window.
- Left decorate the night light to your liking. Acrylic paint, threads, paper, buttons, ribbons - whatever your heart desires.
- Now for the technical points. At the back of the can you need to cut a neat hole for the cord.
- You need to cut out the lid of the jar hole for the cartridge.
- Socket, switch and electrical plug are going together.
IMPORTANT: Only then is the socket secured in the jar and the lamp screwed into it.
- Above putting on a night light jar- and now the craft is ready!
DIY LED night light: instructions, photos
For such a night light you need:
- Plastic tubes, transparent – 2 pcs. The diameter must be different
- LEDs and board for them
- Large traffic jam
- Pebbles made of glass
- Small piece of wire
- Glue and pliers
You can start:
- For starters, it's worth bend the ends at LED bulbs.
- Next is everything the pieces come together using a wire. They should be located parallel each other and be polar.
- Wire ends join to the board.
- Now into a larger tube pasted smaller.
- Voids are filled decorative glass stones.
- Now LED the plug is connected to the tube. All you have to do is turn on the night light - and you can use it!
DIY moon night light: master class, photo
The materials are as follows:
- A balloon that is round in shape when inflated
- Paper towels
- Glue - the most common PVA
- Acrylic paint – white, ivory. Ideal to mix it with ocher
- Sponge
IMPORTANT: The larger the pores on it, the better.
The process of making a night light with your own hands looks like this:
- To begin with, outline the place where the formation occurs. ball knot. The diameter of the circle should be 6 or 7 cm.
- The inflated balloon goes down in glue. Or you can apply the glue with a brush.
- Now its surface covered with paper towels. Preferably do at least 3 layers towels
- As soon as the glue dries, the ball is processed acrylic paint.
- Next to paint dipping a sponge– it should be used to treat the surface of the ball.
- Now you need to cut out the previously outlined circle - the ball must be removed through it.
- Then it is placed inside light bulb or garland.
DIY cloud night light: description, photo
Required materials:
- The lampshade is of a suitable shape, that is, oval or round. If there is no lampshade, you can prepare a wire frame covered with translucent fabric.
- LED light bulb, or many light bulbs
- Thick thread
The operating procedure is as follows:
- In a lampshade or in a wire frame a light bulb is placed.
- Through the lampshade the thread is held- the night light will be attached to the ceiling using it.
- From cotton wool a cloud forms. The fluffier the better. The cotton wool is attached using glue, which just needs to be applied a little to each piece.
IMPORTANT: If the hole in the lampshade is noticeable, it must also be sealed with cotton wool.
- All that remains is to attach the night light to the ceiling- and the storm cloud is ready!
As readers can see, it is not at all necessary to be an expert in order to assemble your own night light. A little patience and careful following of the master classes - and now the cozy interior detail is ready!
Master class on making a night light from wood:
A night light is a device that is used not only for illumination at night, but also as decorative element. It helps create an atmosphere of coziness and comfort in the room. In stores lighting fixtures You can find different night lights, but you can also make them yourself. An LED night light can be made from various available materials - music discs, paper, glass, fabric. The most important thing is to select and create an electronic circuit.
Advantages of an LED night light
Decorative LED lamp Moon
It's quite easy to make a night light from LEDs. The scheme does not cause difficulties even for inexperienced people. The advantages of an LED light source include:
- low power consumption;
- long service life;
- accessibility;
- variety of application schemes;
- quality of light;
- good lighting;
- no heating;
- safety.
A homemade night light made from LEDs can be used for illumination, allowing you to navigate in the dark. The device can be installed in any convenient place.
Types of lamps
Autonomous LED luminaires
All LED night lights can be divided into two groups according to the method of power supply. These include:
- Autonomous. Powered by battery or battery.
- Stationary. Plugs into an outlet.
Autonomous products can be moved and placed in any convenient place. The disadvantages include the expense of batteries, which need to be changed periodically. A model that receives electricity from an outlet can only be installed near a power point. There is no need to buy consumables for such a lamp.
Night lights with motion sensor
Wood lamp
Devices can be equipped with various sensors that make them easier to use. They do not need to be turned on; they activate independently. It is not recommended to place such night lights in the room, as they can detect any arbitrary movement and turn on. They are usually installed in closets, garages, and hallways. The sensitivity of the sensor can be adjusted to avoid false alarms on pets. The range of action is 3-5 meters.
Night light made of wood
This type of night light is completely safe. The wood is processed in such a way that there is no highlighting harmful substances when heated. Wooden LED night lights are even installed in children's rooms, as they are durable, environmentally friendly and difficult to break.
Built-in models can be placed in interior items or furniture. Used for decoration. The disadvantages include the fact that over time, the backlight in one place can become boring, and it is difficult to remove the built-in light source.
Required materials
LED matrix
To create a night light, you need to purchase LEDs or a matrix of diodes. The quantity is selected depending on personal preference. It is better to buy bright multi-colored LEDs. The current strength of each component should not exceed 20 mA.
You will also need to buy resistors. To create a circuit with a series connection, you need 1 current-limiting resistor. If the circuit is in series, all diodes must be of the same value. During electrical installation parallel connection Each LED has its own resistor.
You will also need a semiconductor diode and a plug to connect to the network. An old disk, bottle and other objects from different materials. You can assemble the case yourself.
The tools required are a plastic plate, screwdrivers, a knife, heat-shrinkable tubing, a soldering iron, and pliers.
The simplest scheme
Night light diagram
When creating an LED night light with your own hands, you will need a powerful 1 W white LED. The circuit is transformerless, stable and does not overheat. To ensure normal operation, you need to select a 250-630 capacitor with a capacity of 1 µF. The LED is soldered through a current-limiting resistor. A diode bridge is assembled from 4 rectifier diodes. The recommended current for each component is 1 A, the reverse voltage is at least 1000 V. An example of such diodes is 1N4007.
The entire circuit is attached to the housing using hot-melt adhesive.
Assembly algorithm
LED night light – fan
First of all, you need to solder a circuit of LEDs, resistors and other components. After soldering, the contact points must be insulated using heat shrink.
Next, the body of the future lamp is assembled. There should be a diagram inside. The body can be made from any available materials. For example, transparent plastic elements from CD boxes are suitable. They are glued together with strong glue, and a disk is placed on the bottom so that the light is reflected from it. The entire structure must be degreased with alcohol. If desired, you can glue the legs to the assembled lamp.
A lamp on a fan is perfect for the bedroom. You need to buy a large fan and attach a soldered circuit to it.
Near the bed you can place an LED night light, made with your own hands in the form of a rug. To make it, you don’t even need to solder - just buy a matrix of LEDs and weave it into the carpet.
Night light “Starry sky”
Night light “Starry sky”
This night light imitates the night sky with constellations. To make it you will need a glass jar with a lid, foil, an awl, scissors, led flashlight and a tray.
On the foil you need to draw a sky with stars in any order that the master wants. Place the sheet on a flat surface and use an awl to make holes for the stars. The foil is cut to fit the height of the jar. The paper is rolled into a tube and placed in a jar. A flashlight is placed at the bottom of the can. When you turn it on, you can see the glow from the night light on the walls and ceiling.
In the same way, you can make a night light with your own hands from LEDs and a tin can. It needs to be painted, all stickers removed and holes made. A candle, lantern or garland is placed inside.
Night light in the shape of the Moon
You will need an LED strip and 2 transistors. They will regulate the device and turn the board on/off.
To make a plywood night light with moon-shaped LEDs, you will need a sheet of plywood that is cut into a circle. You need to glue a printed image of the Moon on top. Then you need to drill 2 holes for fastening and pulling wires. The base of the lamp is glued to the plywood. After drying, the LED strip is glued around the perimeter.
1
2
3
4
5
6
Night light from an electric plug or fumigator
Night light from LED strip and power supply
You will need LEDs, 2 resistors, 2 capacitors, a zener diode, and a heat shrink tube.
The grounding pins are removed from the plug. You also need to remove the clamp and grind off the rim on the LED using a file.
A night light is made from fumigator in a similar way. It must be disassembled, the heating element removed and placed on free space LED. The voltage passes through the capacitor. A rectifier bridge is installed at the output, which smoothes out ripples and equalizes the voltage.
You can put a lampshade on the fork, which you can make yourself or purchase in a store.
How to choose a purchased night light
Night lamp for children's room
If it is not possible to make a lamp for your home yourself, you can buy it in a store. The range of products offered is wide, but you need to be able to understand the characteristics.
You should not take too cheap models. They are made from low-quality materials and may be unsafe. Also, you should not take too bright devices with neon colors. They are usually made from harmful materials.
A lamp in the shape of a toy, sun, star, fairy-tale character or other original shape is suitable for a children's room. It is better to take a device made of high-quality plastic and wood. A durable night light made of plexiglass and LEDs is also suitable.
You need to decide in advance where the lamp will be placed. It should fit into the interior and complement it. It is desirable that its design be similar to the style of the rest of the lighting fixtures in the room.
In terms of color, it is better to take a white night light. It will not tire your eyes, and it will fit well into any interior. It can be installed both in the nursery and in the bathroom.
Today, there are many original master classes on assembling beautiful lamps for the bedroom. In order to make a night light with your own hands at home, sometimes it is not necessary to have special power tools or materials on hand. Some models of homemade nightlights can be assembled from scrap materials in no more than an hour. Next we will look at the simplest and at the same time unusual ideas to make a beautiful lamp on your own.
Idea No. 1 – Starry Sky Projector
So, the very first version of the lamp is a star projector made from a can and a battery-powered flashlight. This homemade option is suitable for both a child’s room and a bedroom. To make a starry sky night light with your own hands, first prepare the following materials:
- glass jar with a lid (it is advisable to find a jar in the shape of a cylinder, and not the usual “pot-bellied” one);
- a sheet of thick foil;
- battery-powered flashlight;
- scissors;
- awl.
The idea is this - you should cut the foil to the height of the jar, hole it across the entire area and place it inside the container. After this, you need to put the switched-on flashlight in the jar and the homemade starry night light is ready, you can turn it on at night and enjoy the atmosphere in the “space” style.
By the way, very important point– in the night sky, children love to look at the constellations Ursa Major and Ursa Minor. It would be nice to make a hole in the foil for these two constellations so that a homemade projector displays the most recognizable constellation for the child on the ceiling. You can make a space night light more like a real starry sky if you punch holes in the foil according to the star arrangement: 
There is an easier way to make a starry night light for a children's room with your own hands - using the most ordinary tin can. All you need is to clean the surface of the jar from the label, paint it in a suitable color and make a hole with an awl. After this, you can either put a battery-powered flashlight inside the jar, or even just put a lit candle. The latter option will create a more romantic atmosphere in the bedroom. The finished night light should look something like this: 
Idea No. 2 – LED lamp
We recommend viewing another interesting master class with photo examples on assembling a homemade night light from LEDs. In order to make a beautiful lamp for the nursery, you must prepare the following materials:
- two transparent plastic tubes of different diameters;
- LEDs of suitable brightness and color;
- big traffic jam;
- glass pebbles;
- piece of wire;
- glue;
- pliers;
- board for LEDs;
So, to make the instructions and descriptions clear to you, we will provide you with step-by-step instructions on how to make a night light from scrap materials.
Using this simple technology, you can make an LED night light for a child’s room with your own hands. As you can see, everything is quite simple and it won’t take more than half an hour to create.
Idea No. 3 – Lamp from a can
Well, the last of the original master classes on making a night lamp from scrap materials - using a tea can. In this case, you can make a beautiful night light at home, which is suitable for a child’s room.
So, to get started, prepare the following materials:
- original shaped tea jar;
- a sheet of scrap paper the size of a jar;
- sheet of cardboard;
- stationery knife;
- acrylic paint;
- a piece of sandpaper;
- superglue;
- masking tape;
- light bulb socket;
- ordinary incandescent lamp;
- power cord;
- switch.
Again, it would be more convenient to provide step by step instructions on assembling a homemade night light at home.
- Cut a piece of scrapbooking paper that is the right size to fit completely around the jar. If you choose scrap paper with a pattern, immediately take into account an important point - the top of the night light will be the bottom of the jar.
- Remove the lid from the jar, rest it on a piece of paper, trace it with a pencil and cut it out with a stationery knife.
- Place the cut out template on the jar in a suitable place (in the future this will be a window). Secure the paper oval with masking tape and outline with a pencil.
- Cut out the window according to the markings, as shown in the photo.
- Clean the edges with sandpaper.
- Once again, using the oval template, rest it against a piece of cardboard and trace. After that, draw stripes inside the oval, as shown in the photo, and cut out another homemade night light for the nursery.
- Glue the cardboard to the jar on the inside.
- Decorate the outside of the jar using your imagination. You can make a beautiful lamp by decorating it acrylic paints, paper or even thread.
- On the back of the night light, cut a hole for the power cord.
- Cut a hole in the lid of the jar for the lamp socket.
- Assemble a socket with a light bulb, a switch and an electrical plug in one circuit.
- Secure the socket in the jar and screw in the light bulb.
- Assemble a ready-made night light for the nursery and check its functionality. Ideally it should look something like this:
That's all the instructions for assembling a homemade lamp for a child. As you can see, you can even make such beauty at home from scrap materials, if only you have the desire and a little imagination!
